GSD1000-04 Hotpoint Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaking Dishwasher
Replacing the two corner baffles was the third attempt to stopping the leak. I first replaced the door seal without removing the inner door and the leak did not stop. Then I removed the inner door, reinstalled the door along the bottom and added the small seal required at the lower center portion which is separate than the longer door seal. Still leaked! Then I replaced the corner baffles and alas., the leak stopped. I would recommend that all seals be replaced at the same time. Total cost about $40.00 and can easily be done in one hour or less. I ordered the parts And they arrived remarkably in les than 24 House with regular delivery. Very pleased with Parts Select instructions and service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joanna from SEWELL, NJ
- Parts Used:
- WD28X265
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
old silverware basket had slots that were broken and knives would fall through and get stuck.
Opened the box the new silverware basket came in and replaced the broken one.m
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking
I simply lifted the baffles out and cleaned the base and installed the new baffles and started the dishwasher and NO LEAKS.
Was this instruction helpful to you?
Thank you for voting!
dislodged & deformed baffle leaked after 29 years of use
I lifted out the old baffles, cleaned the soap scum from the recesses, and placed the new baffles in by hand. No tools were required, and total repair time was less than 8 minutes. the total cost was a fraction of the cost of a service call.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from PALESTINE, TX
- Parts Used:
- WD35X10346
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
It was leaking.
Took off old jet dry dispenser and replaced with new and now not leaking.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from DETROIT, MI
- Parts Used:
- WD28X265
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replace dishwasher basket
Pulled out old basket with holes at bottom and replaced it with new basket. Perfect fit!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Wenonah, NJ
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wheels on the lower dishrack were shot from over a decade of use.
Ordered the wheels from PartSelect.com, they were delivered the next day and I simply attached them to the dishrack. No tools needed for this repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Connie from Katy, TX
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rollers on the rack kept falling off when the rack was pulled out
Pushed the roller onto the axle, then snapped it to the rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Indianapolis, IN
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the latch on the wheel broke
I took it out of the package and snapped it on the drawer and slide it back in the dishwasher. The part cost way to much but it was worth it to continue to use my dishwasher
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- thomas from sarasota, FL
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels kept coming off
This is more of a nuisance problem than repair. We have had this excellant dishwasher for years and the last two or so years the wheels kept coming off, my wife would get on me to put them back, after a while she would just lay them on the counter and i would get the message. the reason they kept coming off was because over time the retaining plastic was sprung or broken off. I tried to repair them with glue,tape,etc. nothing worked for long. I am handicapped and couldn't get to the store. I ordered the part from you and got them that same day, my wife and I were amazed. Thank You!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mandy from New Hope, MN
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
rack wheel was jumping off track
Snapped off the old wheel and discovered that the wire that held the wheel seemed bent, so I straightened it with a pliers and then snapped the new wheel on. It was so easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Barstow, CA
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The 2 right front wheels of the bottom dish rack were broken and/or missing.
It really was very simple. The parts just snapped together and then snapped into place on the rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Hilton Head Island, SC
- Parts Used:
- WD12X271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original lower rack rollers (front) were worn out.
Installation of the two new lower rack rollers was extremely easy. Simply aligning each of the new rollers and pressing them into place completed the task in a few seconds.
Was this instruction helpful to you?
Thank you for voting!