GSB2800E*116 General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bradley from Summerville, SC
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher would not drain
Logged on to this site. Removed 4 nuts at the very back. Removed the piston & nut assembly. The rubber piece had worn out. Reversed the process and it runs like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wendy from Kingman, AZ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Dishwasher was not draining
I removed the basket in the back of the dishwasher and unscrewed the plastic piece under the basket. I quickly screwed in the new one and now my dishwashe ris working perfectly.. We came so close to buying a new dishwasher and I am so happy I found the website describing this part. THANK YOU!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- FRANCIS from WINOOSKI, VT
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Basket Broke
Ordered a new basket it was a little large as I ordered the wrong size. I just broke of the tabs that held it in and now its perfect and larger !!!! Simple and great service !!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Romoland, CA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken vent on microwave
Ordered the part and installed...easy and great prices.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WILLIAM from EAST ROCKAWAY, NY
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Water Would Not Drain
Went on line to order new pump. Web site showed "parts which repaired this problem and nut and valve had very high % as the failed part". I then removed nut and valve and was able to see that it was worn as they described. This was a very easy repair and worked perfectly. It saved me from ordering a $60. 00 Pump which would not have fixed my problem. Thank you for a great help for the diys people.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- philip from bluffton, SC
- Parts Used:
- WD24X10018
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
dishwasher would not empty, your list of potential problems was an excellent guide plus the online schmatics
used tips from a past buyer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Om Prakash from Highlands Ranch, CO
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Pool of water at the bottom of the dishwasher after the cycle is complete
It is so easy and simple! Just removed the old part ( Piston and nut assembly), which is at the back of the dishwasher(inside, behind the spray arm and the heating coil) with bare hands. It needs a little push and turn , just like you removing a old stuck nut. One you remove the old nut assembly, replace it with new one. Just hand tightened is enough. Ran the dishwasher and voila...it works like a new one. No more water collection at the bottom! All it took is 10 mins + 12 dollar part + 7 dollar shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Absecon, NJ
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Dishwasher Was Not Draining - Standing Water
Followed the video on this site, replaced part in under 10 minutes, ran a cycle - p-e-r-f-e-c-t !!! Thank you so much - I am sooooo not a diy type person, but this was easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barry from Wrentham, MA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Not draining completely/foaming out door
Watched the video, replaced the recommended part EASY-Done Would not hesitate on any other appliance repairs in the future Great site!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Lawrenceville, GA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Water laid in bottom of dishwasher and turned black after end of cycle
Remove grid at inside at very back. At center under grid is the valve, unscrew CCW, and replace with new valve. Replace grids.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Bradenton, FL
- Parts Used:
- WD12X10284
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishes cloudy, spotting
Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jo from Herndon, VA
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Dishwasher would not drain.
I cleaned all the drains in the dishwasher and the drain in the garbage disposal that leads from the dishwasher. I also removed the piston and nut assembly and tried cleaning it but the dishwasher still did not drain. I was using a wet vac to empty the standing water after the cycle completed. I bought the new piston and nut assembly. It arrived in 24 hours. I unscrewed the 4 screws in the back of the dishwasher that held the screen that covered the assembly, used my hand to unscrew the piston and nut assembly, screwed in the new part and replaced the screen and 4 screws. It completely fixed the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Denver, CO
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Dishwasher won't drain
Removed back screen, screwed out old piece, and replaced. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bradley from Cambridge, WI
- Parts Used:
- WD24X10018
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
clips that hold the spinning arm in place broke
whole assembly screws out, replacement was a breeze. I love this site. Parts came quick
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Loganville, GA
- Parts Used:
- WD28X265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bought a manufactured home
with a dishwasher. Someone had 'packed' the silverware basket and there wasn't one in my dishwasher! Ordered one from here, when it arrived, opened the box, opened the dishwasher and placed it in the correct place. Closed dishwasher - DONE!
Was this instruction helpful to you?
Thank you for voting!