PDW1800N02BB General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Carol from WALSENBURG, CO
- Parts Used:
- WD12X10231
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
two wheels broke off
knocked the broken piece off and snapped the new wheels on - easy breezy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jose from HOUSTON, TX
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Roller wheels on lower dish basket were worn and broken
Removed old roller with pilers and pop in New roller really easy very happy partselect had right rollers it made it easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Los Osos, CA
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
holes in dishwasher silverware basket
removed old basket, put new one in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Inge from ANAHEIM, CA
- Parts Used:
- WD12X10230, WD12X23617
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench (Adjustable)
broken upper roller
Turn water and electric off. remove\ dishwasher
take of old roller mount and replace new part
0
take of old roller mount and replace new part
0
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from ANN ARBOR, MI
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The basket handle was broken in transit.
I ordered the silverware basket because the original started to separate. The shipment box was damaged and sure enough the handle was broken. The handle can be removed so I replaced the new handle with the old handle, since it was the basket that really needed. Pops off very easily.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sophie from HOLYOKE, MA
- Parts Used:
- WD12X10286
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replaced the micro filter
Just tool out the old micro filter and put in the new filter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CHUCK from CINCINNATI, OH
- Parts Used:
- WD28X10215, WD13X23417, WD08X10050
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
bottom door gasket replacement/door latch replacement
Need to remove door from hinges to allow to SLIDE gasket thru small lip on door.After using soap and cleaning lip on dishwasher face ,Gasket never feels to grasp lip properly.Identical gasket from old design,just difficult to install.Door latch was also easy to install,BUT LATCH WAS PURCHASED IN LOCKED POSITION.Make sure to roll tumbler in latch ,or it will never lock.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vivian from RAMSEY, NJ
- Parts Used:
- WD24X10048, WD01X10322
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Leaking drain hose
Removed leaking drain hose under the dishwasher from drain pump and sink drain pipe. Fed new hose behind dw connected with new clamps to dw drain pump and sink drain pipe. Put in high loop under sink.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CAROL from BUFFALO, NY
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed new silverware basket
took out the old basket and put in the new basket
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Gwinner, WI
- Parts Used:
- WD12X10221
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Roller wheels wore out.
manual labor.. And a little help from Milwaukee power tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Rocky River, OH
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Lower rack wheels kept falling off on right side
Definately purchase all the wheels (8) as they are smaller than original wheels. Buy the wheel with attached stud. Pull off old wheels and pop these on!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eric from Stephens City, VA
- Parts Used:
- WD12X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old rinse aid cap melted by heating element
Simply screwed in the new rinse aid cap to replace the old one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Colette from Lakewood Ranch, FL
- Parts Used:
- WD12X10231
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wheels were falling off from the bottom rack of my dishwasher.
I ordered 8 wheels, but I really needed just 4.( I am preventing for the future) It was so very simple to place my order and they were delivered in no time. I simply took off the old one, looked at how they were affixed and put the new ones the same way. Less than 2 minutes to do the entire job. I am a "Handy woman".
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- EUGENE from CENTEREACH, NY
- Parts Used:
- WD28X10215
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- J from Johnson City, TN
- Parts Used:
- WD02X23651
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Rubber gasket for sealing top sprayer arm worn out
The repair piece containing the gasket must be unscrewed and the replacement piece is then screwed into place. Use of a wrench is necessary but used gentle compression as this piece is plastic. Also be careful when starting to thread the piece back on as too much pressure may push the part you are threading it onto out of the back of the dishwasher. ( Note that removing the top rack facilitates the job.. This is done by pushing the locks at the end of the roller tracks in and then to the side, opening the tracks for removal of the rack.)
Was this instruction helpful to you?
Thank you for voting!