FDPC4314AS Electrolux Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Niklas from San Diego, CA
- Parts Used:
- 807145201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
plastic tabs broke
Replaced the part and everything worked fine
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chaney from Batesville, AR
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Missing lower rack roller
Fisrt, I opened dishwasher door. I then pulled out the lower rack & put new part in place and pushed in lower rack. Last, I closed dishwasher door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jimmy from canon, GA
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
water leak around bottom of door
removed old gasket by hand, installed new gasket with hands only. p.s. great doing business with you,thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Modesto, CA
- Parts Used:
- 154430501
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Broken spring/ the first one broke about 6 monthes ago
The 'kick plate' had to be removed, and the feet had to be raised to lift the unit over the floor. the old spring could not be found, and while lying on the floor my husband had to 'feel' for the attatchments to hook up the new spring. The unit was then pushed back and the legs dropped and the unit attatched to the counter. All fixed - - thank you PartSelect for having the right spring.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Athens, AL
- Parts Used:
- 154430501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken door spring
Removed front panel and eased out screws holding the dishwasher in place. Lowered the door and removed old springs. Replaced the springs and sit the unit back in place. When they are this old it is best to replace both springs. Rated easy...,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andy from Aptos, CA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
There were no wheels on the bottom rack of our dishwasher.
This could not have gone easier! As long as you get the proper parts it's a piece of cake. I wish everything was this easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Metairie, LA
- Parts Used:
- 154106202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
dishwasher was leaking at heating element connections
Both heating element brass nuts had a split in them. They had fallen off the heating element and were hanging on the electrical wires. I removed the wires from the heating element and removed the brass nuts from the wires. I then screwed the new nuts on the heating element and reattached the wires. problem solved. I want to thank you for having the parts I needed as Sears had discontinued them for this Kenmore appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David W from Reidsville, NC
- Parts Used:
- 807145201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
My wife noticed the spray arm was not connected.
After removing the 4 torx head screws the cover and stem assembly was removed. The new piece was installed and screws were tightened. That is all it was to it. A very simple repair! Thanks.
D.W.Daniels
D.W.Daniels
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Franklinville, NJ
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Water leaking around the edge of dishwasher
Orderd new gasket which arrived extremely fast, old gasket just pulls out , installed new one same direction as the old gasket fit, stopped leak. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mitchell from Philadelphia, PA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken & missing wheels on lower rack
Installed New rollers onto bottom rack. Part order & delivery were top notch from Partselect. Will definitely order from them again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allan from Portland, OR
- Parts Used:
- 154827601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dishwasher was leaking
Had a leak, due to the factory gasket was 1/2 " to short. Pulled out old one, installed new one, and trimed to fit. Took less the 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Alpharetta, GA
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broke the wheel
merely snapped the part on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Greer, SC
- Parts Used:
- 5304532229
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
lower rack rollers were missing
Rollers just snapped on the diswasher rack. Took just seconds to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Marshalltown, IA
- Parts Used:
- 154430501
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken spring on door
Replaced spring on door
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clarence from Gerald, MO
- Parts Used:
- 154827601
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
dishwasher leaked around the door
My Son used needle nose pliers to remover the old gasket, then starting on the lower right side, inserted the new gasket and used the rounded end of handle of a wooden spoon and pressed the gaste in place by running the handle up and around the top then down the left side. Used sissors to cut the new gasket to length. Door fit very tight. Ran a normal wash cycle and no leaks.
Was this instruction helpful to you?
Thank you for voting!