How to Fix a Door Strike for a Washer That Has Locking Issues

The strike is a small part of the door latch assembly that keeps your washer locked. It is vulnerable to breakage due to regular use. If the strike is damaged, your washing machine may either fail to lock and start the cycle or it may fail to unlock the door at the end of a cycle. If it is damaged or broken, you need to purchase a new one and replace it.

What is a Door Strike?

The door strike is attached to your front-load washer door, and it is a small plastic part that inserts into an opening in the washer and presses down on the?door latch. It activates the door latch, telling the washer whether the door is securely shut, so that the washer can safely begin the cycle.

Where is the Door Strike Located?

You can find the door strike in the door frame of your washer.

How to Access and Remove the Door Strike

1. Unplug the washer for your safety.
2. Open the door of your washer to access the strike and visually inspect it for any damage.
3. If it is damaged in any way, it needs to be replaced, as it is not repairable.

How to Install a New Door Strike

1. Unplug your machine for your safety.
2. Locate the screws holding the door strike in place and remove them.
3. Detach the old strike, and then fit the new on the screw holes.
4. Reinstall the screws and close your door to verify that the door latch engages.

Next: Troubleshooting the Hinges

Go To Main Page: Locking Issues