OEM Ridgid Utility Vacuum Parts & Accessories

Filter Nut

$12.11

Fix Number: FIX10017383
Manufacturer Part Number: 83872

This is a genuine Rigid replacement part. This is a filter nut, it is made of plastic and sits below the filter plate holding the filter in place. When you properly secure this nut onto the thread end of the filter cage bolt, it allows the filter plate to hold the filter in place. Not only do these parts work to keep the filter in place they also help to create a tight seal between the filter and the motor. This replacement part is commonly used in the assembly of wet/dry vacuums. This filter nut is made of plastic, and it is sold individually. Filter plate is sold separately.

Filter

$48.37

Fix Number: FIX11869483
Manufacturer Part Number: 72947

Genuine Ridgid replacement part, this item is sold individually. The purpose of the 72947 filter is to keep dust and debris from exiting the exhaust port on the vacuum. This Filter should be cleaned on a regular basis. Once you can see it is getting worn or is tearing it is time to replace it.

Twin Shield Caster

$22.87

★★★★★

1 Review

Fix Number: FIX11869528
Manufacturer Part Number: 73627

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Weber grills. It is utilized to support the unit and allow for easy transportation, but over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality part is sold individually. Make sure to check the appropriate diagrams of your model for the correct location and use of this component.

Toggle Switch

$11.73

Fix Number: FIX17016247
Manufacturer Part Number: 12313R

Sourced directly from Ridgid, this OEM approved replacement Toggle Switch is designed for certain models of Ridgid Utility Vacuums. To see if your device is compatible, please see the "Model Cross Reference List" below. The primary purpose of the Toggle Switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in vacuums. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Toggle Switch is sold individually.

Caster

$20.89

★★★★★

1 Review

Fix Number: FIX11866617
Manufacturer Part Number: 12293

This is a single caster for a vacuum. The wheel allows you to move the vacuum around with ease. It is sourced directly from the original manufacturer, ensuring the best quality. If the wheel is damaged or missing, it will make the vacuum off-balance or difficult to transport, in which case it needs to be replaced.

Drum Latch

$10.43

Fix Number: FIX11869957
Manufacturer Part Number: 83747

Foot Caster

$11.62

★★★★★

2 Reviews

Fix Number: FIX11867134
Manufacturer Part Number: 29833

This is a genuine OEM sourced replacement part designed for use with Ridgid wet/dry vacuum. It is an insert that is connected to the body and it holds the wheel/caster. This part is made out of plastic and it is sold individually.

Foot Caster

$13.95

★★★★★

1 Review

Fix Number: FIX11866635
Manufacturer Part Number: 12388

This is one black plastic foot for a vacuum. The foot fits onto the side of the canister, and the caster is pushed into the foot. If this part has cracked or is broken, it may not be able to hold the caster properly in place, making it difficult to manoeuvre the vacuum or making it unstable. This part is an OEM replacement, meaning its an exact fit for your model.

Installation Instructions

Juan from CORP CHRISTI, TX

Foot holding the caster gave way and no longer held the caster not repairable.

Removed the old part and slid in the new part no tools required. Read more...

Brush And Brush Holder (brush

$25.99

★★★★★

1 Review

Fix Number: FIX11867193
Manufacturer Part Number: 30438

This brush and brush holder set is supplied by the original manufacturer for use in vacuums. It includes 2 carbon brushes, 2 brush holders, and two springs. The brushes have measurements of 1.5 inches long, 3/4 inches wide, and 3/16 inches thick. Over time the brushes may wear down, become damaged, or dislodged, leading to reduced power output, unusual noses, and difficulties starting the equipment. Ensure the equipment is switched off before beginning the repair. Remove the motor housing to access the brushes. Carefully remove the springs and fasteners that hold the brush and holders in place. Mount the new brush holders onto the motor and position the new brushes into the holders. Secure the brushes in place with the spring and reattach the motor housing to complete the repair.

Filter Cage

$16.31

Fix Number: FIX17842051
Manufacturer Part Number: 54493

Genuine Manufacturer Approved replacement part used on certain Ridgid Wet/Dry Vacs. This item is made out of Plastic and it is Sold Individually. This Cage is holding the filter in place, it features an updated design compatible with the new style filters.

Ridgid Utility Vacuum Parts

Popular Ridgid Utility Vacuum Parts

Installation Instructions

Ridgid Utility Vacuum Appliance Types

Related Ridgid Utility Vacuum Parts

Popular Ridgid Utility Vacuum Models

Ridgid Utility Vacuum Parts

Start With Your Model Number

Popular Ridgid Utility Vacuum Parts

Installation Instructions

Ridgid Utility Vacuum Appliance Types

Related Ridgid Utility Vacuum Parts

Popular Ridgid Utility Vacuum Models