Hoover Upright Vacuum Belts

Fix Number

FIX12068781

Manufacturer Part Number

H-AH20080

This genuine OEM supplied part is specially made for use with Hoover vacuums. The purpose of the belt is to drive the brush roller assembly. It is installed on the shaft of the motor and on the end of the brush roller. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality belt is made of durable rubber and is sold individually. NOTE: We do have an article and a video on how to install this belt. Here is the link to it. <u><a href="http://www.ereplacementparts.com/article/4999/How_to_Replace_a_Vacuum_Belt.html">How to Replace a Vacuum Belt </u></a>

★★★★★

★★★★★

1 Review

Fix Number

FIX12068779

Manufacturer Part Number

H-AH20065

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum performance. This pack includes two (2) rubber belts. To replace this item you would need a screwdriver. • Access the vacuum belt and brushroll area • Remove the brush roller and the old belt • Install the new vacuum belt on the motor shaft and brush roller • Install the brush roller with the belt correctly positioned on it • Reassemble the vacuum

Fix Number

FIX12066423

Manufacturer Part Number

H-38528035

Genuine Craftsman replacement part, this item is sold individually. This the belt that drives the self propelled unit on the vacuums that have that system and use this part number. It is also used on some Hoover self propelled models.

Fix Number

FIX10334439

Manufacturer Part Number

H-38528040

Genuine OEM replacement part, this item is sold individually. The purpose of this belt is to rotate the Brush Roll on the vacuum models shown below. This belt is Style 23. Depending on the model you have, it can be installed in different ways. If possible look how the old belt was installed so it will be easier to replace it.

Fix Number

FIX12066424

Manufacturer Part Number

H-38528036

This replacement drive belt is specially manufactured for Hoover vacuums. It is an authentic OEM sourced replacement part, not an aftermarket alternative. It is the belt that would spin the brush roller. Over time rubber belts tend to stretch and wear our requiring replacement. It is recommended to replace these belts every 6 months to ensure top performance. Please note, this belt is sold individually. Replacing this belt is a simple job that only requires a screwdriver. • Remove the bottom plate • Remove the brush roller and the old belt • With lettering on outside of belt slide new belt over motor pulley • Insert agitator through belt and place belt in belt guide on an agitator • Grasp agitator firmly and fit it into position • Turn agitator making sure belt is not pinched between agitator and agitator shield • Reassemble and test the unit

Fix Number

FIX12067933

Manufacturer Part Number

H-562535001

This is a genuine Hoover-made vacuum belt. The belt fits around the drive shaft and the brush roll. The brush roll is spun when the machine is on and the handle is in the unlocked position. This is a cogged belt, which is designed to fit into notches on the brush roll in order to efficiently transfer power to it. One belt is included per package.

Fix Number

FIX10334772

Manufacturer Part Number

RO-JZ0900

This is a genuine OEM sourced replacement part that is intended to be used with upright vacuums from Dirt Devil and Hoover. The belt attaches to the motor pulley and the brush roll in the vacuum's base. This item is used to allow the motor to rotate the brush roll. This belt is sold as an individual replacement part.

Fix Number

FIX12064794

Manufacturer Part Number

H-001942002

This is a genuine Hoover belt made for stick vacuums. This cogged belt features notches made to align into sprockets in the brush roll. It transfers energy from the motor to the brush roll in order to spin it. This cogged design is efficient and longer lasting than tension-based belts. This belt is made to be changed every one to two years. One belt is included per package.

Fix Number

FIX12064882

Manufacturer Part Number

H-12471

This is a genuine Hoover-made vacuum belt made for use in the Dial-A-Matic series. The vacuum belt attaches from the motor drive shaft around the agitator brushroll in order to spin it when activated. This flat style belt uses friction to stay in place. Note that the old belt may seem larger than the new one due to stretching during normal use. One belt is included.

Fix Number

FIX12065049

Manufacturer Part Number

H-160147

This is an original replacement part manufactured for use with Hoover upright vacuums. The special belt is used to link the motor and the power drive unit to engage the self-propel feature of the vacuum. This belt is available as an individual replacement part.