Belt H-38528036

This replacement drive belt is specially manufactured for Hoover vacuums. It is an authentic OEM sourced replacement part, not an aftermarket alternative. It is the belt that would spin the brush roller. Over time rubber belts tend to stretch and wear our requiring replacement. It is recommended to replace these belts every 6 months to ensure top performance. Please note, this belt is sold individually. Replacing this belt is a simple job that only requires a screwdriver. • Remove the bottom plate • Remove the brush roller and the old belt • With lettering on outside of belt slide new belt over motor pulley • Insert agitator through belt and place belt in belt guide on an agitator • Grasp agitator firmly and fit it into position • Turn agitator making sure belt is not pinched between agitator and agitator shield • Reassemble and test the unit