OEM Dirt Devil Upright Vacuum Parts & Accessories

F-22 Filter

$12.48

Fix Number: FIX10334810
Manufacturer Part Number: RO-LV1110

This replacement F-22 filter is a high quality OEM item that is specially produced for Dirt Devil vacuums. It is an authentic part that helps to filter out dust and debris from the air that goes in the engine. Replacing this pleated paper filter is a simple task that does not require any tools, take out the old filter and replace it with a new one.

Belt Pack

$7.81

Fix Number: FIX10334598
Manufacturer Part Number: RO-720310P

Genuine Dirt Devil Style 4/5 Belt fits all Featherlite Uprights that use paper bags, all Swivel Glide Uprights that use paper bags, and all Dirt Devil Vision Uprights. Replace your belts every 3 to 6 months.

F-2 / Universal Filter Assembl

$15.33

Fix Number: FIX10334865
Manufacturer Part Number: RO-SFA115

This universal filter assembly is a genuine Dirt Devil part, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use on vacuums. This pleated paper filter will help to remove dust and other particles from the air. Keep in mind, this universal filter is sold individually. No tools needed to replace this part, simply take out the old filter and replace it with a new one.

Style 5 Belt

$6.73

Fix Number: FIX17016322
Manufacturer Part Number: RO-720310

This is a genuine manufacturer sourced replacement tyle 5 drive belt used on Dirt Devil and Royal upright vacuums. It is used to drive the brush roll assembly. This belt is made out of rubber material and it is sold individually. Over time belts will wear out and stretch requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Replacing a belt of an upright vacuum is a simple and quick task that should only require a screwdriver. • Ensure the vacuum is unplugged • First remove the bottom plate • Slide the belt off the motor shaft • Lift and remove the brush roll • Remove the old belt • Place the new belt on the motor shaft • Slide the brush roll through the belt • With belt in place, pull and slide brush roll into nozzle • Secure the bottom plate • Reattach nozzle guard

Flat Vacuum Belt (style 4 Or 5

$9.22

Fix Number: FIX10334544
Manufacturer Part Number: RO-540310

This is a genuine Dirt Devil upright vacuum belt. It fits vacuums that use a Style 4 or Style 5 belt. This is a flat belt which is used to transfer motion from the drive shaft to the brushroll. Th brushroll spins inside the suction nozzle in order to agitate the fibers of carpet or upholstery. This loosens dirt for a thorough clean. Note that the old belt may seem larger then the replacement belt because they get stretched out over time. One belt is included per package.

Type U Bags - Microfresh / 3 P

$10.55

Fix Number: FIX12022303
Manufacturer Part Number: RO-920075

This is a genuine OEM Dirt Devil Type U vacuum bag. This bag acts as the primary filter of the machine. The Microfresh bag features multi-layered filtration. It is designed to retain much smaller particles than Dirt Devil\'s standard U bags. This listing is for one package of three filter bags.

Style 10 Belt

$5.95

★★★★★

1 Review

Fix Number: FIX10334638
Manufacturer Part Number: RO-860140P

These are genuine manufacturer sourced replacement belts used on upright vacuums. It helps to drive the brushroll assembly. These belts are made out of rubber. Includes two (2) belts per order. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • First remove nozzle guard • Slide belt off motor shaft • Lift and remove brushroll • Dispose of old belt • Place belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reattach nozzle guard

Wheel Retainer Cap

$5.95

Fix Number: FIX10473218
Manufacturer Part Number: RO-801711

This is a high-quality component which is made for Dirt Devil and Royal vacuums. It is supplied from the original equipment manufacturer. The cap is utilized to secure the wheel on the axle. If the cap is damaged or missing, this part will provide an identical replacement. Make sure to check the diagrams for your specific model for the correct installation of the new component. This high-quality wheel retainer cap is made of durable material and is sold as an individual item. Replacing it is a simple task that should only require pliers.

Vacuum Brush Belt (style 23)

$5.95

Fix Number: FIX10334439
Manufacturer Part Number: H-38528040

Genuine OEM replacement part, this item is sold individually. The purpose of this belt is to rotate the Brush Roll on the vacuum models shown below. This belt is Style 23. Depending on the model you have, it can be installed in different ways. If possible look how the old belt was installed so it will be easier to replace it.

Hepa Filter Assembly

$23.44

Fix Number: FIX10334734
Manufacturer Part Number: RO-JC0280

This is a Genuine OEM Sourced replacement part designed for use with Upright Vacuums. This Filter helps to keep the air clean. This part is made out of Plastic and Paper and it is Sold Individually. No tools are required to replace this Filter. You can simply remove the old filter from the vacuum cleaner and replace it with the new one. Designed according to strict HEPA standards, the media in this filter trap particles 75 times smaller than a human hair, including 99.97% of dust mite debris, animal dander, molds and pollen down to 0.3 microns.

Dirt Devil Upright Vacuum Parts

Popular Dirt Devil Upright Vacuum Parts

Dirt Devil Upright Vacuum Appliance Types

Popular Dirt Devil Upright Vacuum Models

Dirt Devil Upright Vacuum Parts

Start With Your Model Number

Popular Dirt Devil Upright Vacuum Parts

Dirt Devil Upright Vacuum Appliance Types

Popular Dirt Devil Upright Vacuum Models