Thermador Parts

Dishrack Roller - Grey

★★★★★

★★★★★

(3)

This part includes one grey plastic wheel with the attachment, designed for your lower dishrack. It allows you to slide the dishrack in and out smoothly. If one of these wheels is missing or damaged, it can make it difficult to slide the rack in and out and can make it impossible to close the dishwasher door. Replacing this part is simple, snap it off the dishrack, and snap the new one into place. Note that each wheel is sold separately, so order accordingly.

Water Filter This ice and water filter is NSF-certified to filter out sediment, chlorine, and lead to improve the taste and odor of your water. It is recommended to change the filter every six month, or after 200 gallons of water have passed through. Replacing the filter is a simple job that does not require any tools, just be sure to shut off the ice maker beforehand. The filter is located below the fridge door in the kick plate grill, behind the round cap. Rotate the cap a quarter turn counterclockwise, so it goes from a horizontal to a vertical position. Pull the filter out giving it a wiggle if necessary to get it loose. Slide the holder cap off the old filter and place onto the new one. Remove the protective cover from the end of the filter and insert it into place, with the holder cap in the vertical position. This time make a quarter turn in the clockwise direction, so the holder is back in a horizontal position. This is a genuine OEM part that measures approximately 2.5 inches in diameter and 10.5 inches long.

Door Seal

★★★★★

★★★★★

(1)

Bake Igniter

Tine Holder This tine hold is a genuine OEM replacement part for your dishwasher, measuring approximately 1 inch long and is sold individually. This part is also known as a tine clip or a rack flip tine clip. It is used to the hold the tines of your dishrack in place. Once you have adjusted the tine racks to a position that works with your dishes, this clip will hold the tines in place and is designed to hold two rows. There are no tools required to install a new clip, but a flathead screwdriver may be needed to remove the old one. The new clip just snaps onto the dishrack, and you can then adjust and hold the tines in place.

Replacement Ice Maker

★★★★★

★★★★★

(6)

The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process until the ice storage bucket is full. If yours is not making ice or it is leaking, it may be time to replace the ice maker. Depending on usage and water quality, these should be replaced every three to ten years. Please note that this kit does not come with a new shut off arm (also known as a bail arm). You will need to reuse the arm from your old ice maker, or you can purchase a new one separately. This genuine OEM parts kit includes the replacement ice maker, wire harnesses (flat and round plug versions), and the mounting hardware. The wire harness from your old ice maker can also be reused if you choose. This model is approximately 11x5 inches in size, made of plastic and metal, and is black and silver in color. This model does not work with refrigerators that have the ice auger on the door, it is meant to sit in the upper left hand of the freezer. Please ensure that you disconnect the power and water supply before beginning this repair.

Light Bulb - 40W

★★★★★

★★★★★

(2)

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

SPARK IGNITION SWITCH

TUBE

Lower Rack Wheel with Clip

★★★★★

★★★★★

(1)

This is a lower rack wheel with a locking clip, sold individually. It does not include the axel. This genuine part is made of durable plastic in the color gray. It attaches directly onto the rack by snapping it into place on the frame. Roller wheels tend to wear with time, so it is advisable to replace them in pairs.