Whirlpool Ice Maker Ice Makers

Ice Maker Bin Temperature Sensor This bin temperature sensor is for ice makers. The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board. Disconnect the power before installing this part. Wear work gloves to protect your hands.

Icemaker Control Assembly This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Water Fill Cup and Bearing

★★★★★

★★★★★

1 Review

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

Ice Cutter Grid Complete Assembly This is an ice cutter grid assembly for your ice maker. If your machine is not producing ice properly, the assembly may need replacing. You will find this part in the main unit of the ice maker. The thin heated wires slice the ice into small cubes that are released into the bin. If your cutter is damaged the ice will clog up your appliance.

Ice Mold

★★★★★

★★★★★

1 Review

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

Ice Maker Shut-Off Arm This part signals the icemaker to stop making ice once the bin has reached a desired amount.

Ice Maker Front Cover

Shut Off Arm When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.

Ice Bucket Holds the ice when it's released by the ice maker.

Ejector Arm This arm is used to eject the ice from the icemaker into the bin.