Kenmore Ice Maker Ice Makers

Kenmore Appliance Parts
Shop By Part Type

Popular Kenmore Ice Maker Ice Makers

$113.75
  In Stock
Replacement Ice Maker
★★★★★
★★★★★
(5)
Fix Number FIX358591
Manufacturer Part Number 4317943
The ice maker works by filling with water from the inlet valve, freezing it into cubes, and then dispensing the cubes into the storage bucket. It will then refill with water and repeat this process until the ice storage bucket is full. If yours is not making ice or it is leaking, it may be time to replace the ice maker. Depending on usage and water quality, these should be replaced every three to ten years. Please note that this kit does not come with a new shut off arm (also known as a bail arm). You will need to reuse the arm from your old ice maker, or you can purchase a new one separately. This genuine OEM parts kit includes the replacement ice maker, wire harnesses (flat and round plug versions), and the mounting hardware. The wire harness from your old ice maker can also be reused if you choose. This model is approximately 11x5 inches in size, made of plastic and metal, and is black and silver in color. This model does not work with refrigerators that have the ice auger on the door, it is meant to sit in the upper left hand of the freezer. Please ensure that you disconnect the power and water supply before beginning this repair.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • See more...
$178.08
  In Stock
Ice Maker
★★★★★
★★★★★
(4)
Fix Number FIX1993870
Manufacturer Part Number WR30X10093
The ice maker assembly makes ice by filling the tray with water from the inlet valve, freezing it until solid cubes are formed, and then ejecting them into the ice bucket. This process will repeat until the bucket has reached capacity. If your fridge is no longer making ice, the assembly may need to be replaced. This is a genuine OEM replacement that measures 10 inches by 5 inches in size and will make seven crescent shaped pieces of ice each cycle. The kit is mainly made of white plastic, and includes a 4-pin round plug-in connector, a 6-post plug-in connector, tube, and fill cup. Depending on your frequency of use, the ice maker may need to be replaced every three to ten years. Regular wear and tear is the main reason this part may need to be replaced but be mindful of accidental damage.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • See more...
$123.32
  In Stock
Icemaker Control Assembly
Fix Number FIX2341896
Manufacturer Part Number W10190935
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Leaking
  • See more...
$53.91
  In Stock
Ice Maker Bin Temperature Sensor
Fix Number FIX11755842
Manufacturer Part Number WPW10511923
This bin temperature sensor is for ice makers. The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board. Disconnect the power before installing this part. Wear work gloves to protect your hands.
$16.61
  In Stock
Ice Bucket - White
Fix Number FIX3499784
Manufacturer Part Number WR30X10154
$32.75
  In Stock
Water Fill Cup and Bearing
★★★★★
★★★★★
(1)
Fix Number FIX11743318
Manufacturer Part Number WP628356
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
Fixes these symptoms
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
$263.07
  In Stock
Ice Cutter Grid Complete Assembly
Fix Number FIX11740334
Manufacturer Part Number WP2313637
This is an ice cutter grid assembly for your ice maker. If your machine is not producing ice properly, the assembly may need replacing. You will find this part in the main unit of the ice maker. The thin heated wires slice the ice into small cubes that are released into the bin. If your cutter is damaged the ice will clog up your appliance.
$123.63
  In Stock
Ice Mold
★★★★★
★★★★★
(1)
Fix Number FIX11749915
Manufacturer Part Number WPW10190929
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
Fixes these symptoms
$5.69
  In Stock
Ice Maker Front Cover
Fix Number FIX11752097
Manufacturer Part Number WPW10289690
$44.30
  In Stock
Shut Off Arm
Fix Number FIX11743310
Manufacturer Part Number WP627792
When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
Fixes these symptoms

Related Parts