OEM Waring Blender Parts & Accessories

Washer

$6.51

Fix Number: FIX10505519
Manufacturer Part Number: 003510

Washer

$6.51

Fix Number: FIX10505599
Manufacturer Part Number: 009724

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced. For proper application please refer to diagrams of your unit. This part is made out of rubber material and it is sold individually. To complete this repair you will need a wrench.

Coupling

$20.72

★★★★★

2 Reviews

Fix Number: FIX10505714
Manufacturer Part Number: 014009

This is a coupling for your blender. The coupling connects the motor and the blade assembly in your unit. It transfers power from the motor into the assembly. If your coupling is not engaging with your blade assembly, the teeth may be too worn down. If this happens you will need to replace your coupling. This part is made entirely of plastic and is sold individually.

Brush And Spring Assembly

$37.49

Fix Number: FIX10506937
Manufacturer Part Number: 027381

This is an authentic Waring replacement part, sourced from the original manufacturer for use with blenders. Brushes are items that will wear down over time and eventually need to be replaced. Worn brushes can cause the blender to run off and on, and can prevent the motor from starting all together. This brush is sold individually, please note two brushes are required.

Center Lid

$6.51

Fix Number: FIX10505618
Manufacturer Part Number: 011700

This center lid is a main part in blenders. The lid fills and plugs the center hole in the outer lid. *Please note: this part is sold individually. Check the diagram provided by the manufacturer for further installation instructions.

Blending Assembly

$27.83

Fix Number: FIX10508903
Manufacturer Part Number: 501859

This is a Genuine Manufacturer Approved replacement part used on Waring Blenders. This part consists of Plastic Body and a Metal Blade. Please note the Coupling that drives the Blade is Sold Separately. Replacing this item is easy and does not require any Tools. • Simply remove the Jar Bottom • This will allow for the Blending Assembly to be separated • Remove the Coupling and the Sealing Ring/Gasket • Replace the Blending Assembly with the new one • Reattach the Coupling and the Gasket • Secure the Blending Assembly with Jar Bottom/Collar

Washer

$6.51

★★★★★

1 Review

Fix Number: FIX10505518
Manufacturer Part Number: 003509

Genuine Waring replacement part, this item is sold individually. This part acts as a seal for the blenders shown below. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced.

Washer

$6.51

Fix Number: FIX10505517
Manufacturer Part Number: 003508

This washer is a genuine OEM replacement part sourced directly from the manufacturer. It is commonly used in Waring blenders. This part is a small flat ring that is placed in-between the bearing holder and the bearing cap to evenly distribute the pressure. It should be replaced if any leakage occurs. It is sold individually and requires a wrench to replace.

Gasket

$6.51

★★★★★

1 Review

Fix Number: FIX10505574
Manufacturer Part Number: 006890

This gasket fits blenders and drink mixers. The gasket provides a tight seal between the blending assembly and blending jar to prevent liquids from leaking out when in use. If your gasket is worn out or your appliance begins leaking, then check the gasket and replace immediately. *Please note: this part is sold individually.

Center Lid

$15.26

★★★★★

1 Review

Fix Number: FIX10505502
Manufacturer Part Number: 003146

This is a genuine manufacturer approved replacement part designed for use on Waring blenders. This item fills the center hole in the outer lid. It is made out of clear plastic and it is sold individually.

Waring Blender Parts

Popular Waring Blender Parts

Waring Blender Appliance Types

Related Waring Blender Parts

Popular Waring Blender Models

Waring Blender Parts

Start With Your Model Number

Popular Waring Blender Parts

Waring Blender Appliance Types

Related Waring Blender Parts

Popular Waring Blender Models