Sharp Parts

Sharp Appliance Parts

Popular Sharp Parts

Light Bulb - 40W
$11.72
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX884734
Manufacturer Part Number
8009
This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Installation Instructions

Helen from Quincy, MA
lightbulb in refrigerator went out
Removed plastic shield on top of refrigerator. Removed old bulb.. Replaced new bulb. Reinstalled plastic shield. Voila! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX12728638
Manufacturer Part Number
W11384469
Door switch turns the light off when you close the door.
Fixes these symptoms

Installation Instructions

Marilyn from Dublin, OH
Light switch no longer worked
Turn off and unplug your refrigerator. I used the screwdriver on the left side of the part (where the plug is) and used the putty knife at the same time on the right side to push the spring lock portion of the part in. The part snapped out. I unplugged the left contact from the plug and put it on the new part, then I unplugged the right contact and put it on the new part. I did this so the wires would not go up into the refrigerator and be hard to find. I put the left side of the new part where the plug and contacts are in first then I snapped the right side in place. I plugged the refrigerator back in and it worked perfectly. Just take your time and gently remove and reconnect the new part. The store where I bought my refrigerator wanted $69.95 for a service call plus an hourly charge and part charge. Count on this site for your parts and do it yourself. I ordered the part on Monday, it was delivered on Tuesday around noon and I made the repair that afternoon. Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2121513
Manufacturer Part Number
D7824706Q
If your freezer has stopped making ice cubes, it may be time to replace your ice maker. Normal wear and tear, or accidental damage may be the cause of this. This model includes the control device and ice mold, which are made of plastic and metal, and measure approximately 11 inches long by 5 inches wide. Please note that this kit does not include the cover, ice level arm, or the wire harness. These parts can be ordered separately, or you can use the existing parts from the original ice maker. This Replacement Ice Maker is a genuine OEM part and is also known as an Ice Maker Assembly or a Refrigerator Ice Maker. Installation will require a quarter inch nut driver, and make sure that you disconnect your power and water supply before beginning this repair. Once the new part is in place, your fridge will begin making ice again within a few hours.
Fixes these symptoms
  • Clicking sound
  • Doesn’t stop running
  • Ice maker dispenses too little ice
  • See more...

Installation Instructions

Edward from Casa Grande, AZ
Unit quit working. Wouldn't cycle any more. Made sounds like gears were maybe stripped..
Followed installation video on this web site. Works like a new one ! Read more...
Door Switch
$27.62
In Stock
Fix Number
FIX12731166
Manufacturer Part Number
W11396033
This part includes one authentically sourced 3-pin rocker switch for a refrigerator. It is responsible for turning the light on inside the fridge when the door is open. It is commonly replaced because the light has stopped turning on with the door open. For this simple repair, start by disconnecting the power. Use a putty knife and a flathead screwdriver to pry the door switch out of the liner. Disengage the wire harness to release the damaged switch. Install the new door switch by first connecting it to the wire harness. Line the switch up on the liner and snap it into position. Power it back up and double-check that it is working.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Light not working
  • See more...

Installation Instructions

James from Aurora, IN
Left door light switch broken
Unlike the easy installation in the video, this model has the switch & connector glued in with injected foam. I had to pry and dig the old switch out of the door and then dig the connector out. This was all but impossible and I put some scrapes on the door panel doing it. Installation of the new switch was a breeze after almost destroying my fridge getting the old switch outI. If you have this model, I would recommend having a pro replace it for you! One more tip, this switch not only controls the light but also controls the ice maker, so if you botch the job, your ice maker won't work either! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX395284
Manufacturer Part Number
833697
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.
Fixes these symptoms
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • Fridge runs too long
  • See more...

Installation Instructions

Dan from Marietta, GA
Refrigerator not cooling.
Watched the video, replaced with the new motor, works great, fridge ice cold. Read more...
DIODE
$29.50
In Stock
Fix Number
FIX12584264
Manufacturer Part Number
W11256462
This part allows power to go one way but not the other.
Fixes these symptoms

Installation Instructions

eugene from longs, SC
would not heat
took out four screws which opened up area top of microwave took off metal faceplate used pliers with rubber grip placed on magnatron then unscrewed one screw which held wire to magnatron then pulled out then reversed process Read more...
ARM-SHUT
$46.11
In Stock
Fix Number
FIX12712096
Manufacturer Part Number
W11342242
Fixes these symptoms
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • See more...

Installation Instructions

Teresa from VALLEJO, CA
The plastic flap (part PS992028) had been mashed into little pieces
It was very simple. The most difficult part was finding a smaill mirror. Once that was solved I simply pulled the wire assembly and replaced it with the one I had purchased. It took about 10 minutes. Just because I was a bit unsure. The wire goes in two points of the assembly. Read more...
Run Capacitor
$66.66
In Stock
Fix Number
FIX11743364
Manufacturer Part Number
WP65889-4
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Fixes these symptoms
  • Clicking sound
  • Freezer section too warm
  • Fridge and Freezer are too warm
  • See more...

Installation Instructions

David from Moncks Corner, SC
fridge and freezer were not cold - light was on and circulation fan was running
cleared storage items on top and along side of fridge; pulled out from wall; removed access cover and vacuumed all I could reach; these steps took 20 minutes, replacing the capacitor @ 10 minutes; troubleshooting guide indicated probable bad "run capacitor" located with "radiator" cooling fan and/or plugged into relay mounted on compressor. I located compressor option, only, and I replaced run capacitor. I could detect no cooling the first day, but 24 hours lated I had ice. It took another 24 hours for fridge section to chill my favorite beverage. I guess this makes for an energy efficient refrigerator, but it sure took a long time to cool, so give it time to work.. Read more...
Light Bulb - 7W
$14.21
In Stock
Fix Number
FIX11731356
Manufacturer Part Number
W10857122
Sold individually. This bulb is a 7 watt appliance incandescent light bulb.This appliance light bulb is two inches long. It is used for many clothes dryers.
Fix Number
FIX2003478
Manufacturer Part Number
12001991
In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Ice maker not making ice
  • See more...

Installation Instructions

Craig from E. Fairfield, VT
Parts of Ice Dispenser Assembly fell into my cup
I followed the lead of the professional video provided so will not go into details on what I did. I'll just add a few of my hurdles that I ran into. Pay close attention to the video on how the solenoid stem fits onto the plastic assembly. I didn't get that exactly correct the 1st time around and first try didn't go well. I also had a problem with the 'CUBE' option being selected after reassembly. I had to clean the contacts up on the printed circuit board. I used an eraser which didn't seem to work. Then used a small screwdriver to remove a small film off from the contacts. Finally got the cube selection to work. I believe these new parts will also help in preventing the dispenser from frosting up. Won't know for sure until summer time but when its humid out our ice assembly would frost up often. The new ice shute flapper seems to seal much better than the old one because the seal had practically worn away on the old one. Again, watch the professional video. It is an exact representation of what needs to be done. Read more...

Sharp Appliance Types

Popular Sharp Models