Dispenser Housing Shield WR17X11170
$20.46
In Stock
- Fix Number:
- FIX292255
- Manufacturer #:
- WR17X11170
- Manufactured by:
- GE
Jump to:
Product Description
This part helps to contain parts for the ice and water dispenser. The overlay and dispenser board is attached on the front of the housing shield.
-
Works with the following brands:General Electric, Hotpoint, Kenmore
-
Works with the following products:Refrigerator
-
Fixes the following symptoms:Not dispensing water, Ice maker won’t dispense ice, Leaking
-
Part# WR17X11170 replaces these:AP3187506, 945253, WR17X10746, WR17X10815, WR17X11077, WR17X11143 ... Show more , WR17X12152 Show less
- Works with the following brands:
- General Electric, Hotpoint, Kenmore
- Works with the following products
- Refrigerator
- Fixes the following symptoms
- Not dispensing water, Ice maker won’t dispense ice, Leaking
- Part# WR17X11170 replaces these:
- AP3187506, 945253, WR17X10746, WR17X10815, WR17X11077, WR17X11143, WR17X12152
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Michael from Denton, MD
- Parts Used:
- WR17X11264, WR17X11170
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
No water in door dispenser
Verified that the pump was working and found that the water line was frozen in the door .decided to use hair dryer to thaw and ended up melting water dispenser and housing so had to replace . it took about 30min to change out but you do need a little skill to do it .by the way ended up leaving door open to thaw and all is well good luck
... Read more
on your repair.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Bethel Park, PA
- Parts Used:
- WR17X11267, WR17X11170
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
No Ice Or Water from Dispenser
Replaced the dispenser housing & Ice Funnel that was damaged from trying to thaw the water supply to the dispenser with a hair dryer . Only problem is that the ice funnel is Black but the original was white , but it works fine
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Whitwell, TN
- Parts Used:
- WR17X11264, WR17X11170
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Replaced dispenser housing and ice funnel
Carefully remove selector panel from door by taking a small flat screw driver and prying forward on bottom of panel. Unplug all 3 wires connecting panel to fridge.They are locked with a small clip on over front of plug. Remove the 4 phillips screws and carefully remove the housing (moving wires not to pull on them). Remove the funnel by r
... Read more
aising the retaining stops and pull straight out. Save the spring to use on the new parts. Unplug the light and push the side in and take it out from the front side. Unclip the switch on the other side. Reassemble the new housing using the reverse steps of disassembly. When putting housing back in door be cautious not to pinch the wires between housing and door frame. This was a very simple job but requires patience working with small parts and tight areas.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- stephen from Plymouth, MN
- Parts Used:
- WR38X23216, WR17X11170
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Ice dispenser on front door melted and needed replacement
This model refrigerator has a tendency for the water line ( through door) to freeze up, in my attemp to accelerat the defrosting in melted the the flap, the dispenser housing and on removing the front trim broke some of the tabs. Pulled off the trim , used a small screw driver to lift the tabs on the top of the electronics board, I then p
... Read more
ulled off the three wire sockets ( lift the plastic tab first) all three are different sizes so cannot be reinstalled incorrectly, unscrewed the dispenser housing , removed the spring for reuse. Reverse this process, don't forget the spring, order the front tim as a precaution,
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX292255
Manufacturer Part Number: WR17X11170
Manufacturer Part Number: WR17X11170
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.