Compressor Start Relay 216594300
$22.68
In Stock
- Fix Number:
- FIX426380
- Manufacturer #:
- 216594300
- Manufactured by:
- Frigidaire
Jump to:
Product Description
-
Works with the following brands:Frigidaire, Kenmore, Gibson, Kelvinator
-
Works with the following products:Refrigerator, Freezer, Dehumidifier
-
Fixes the following symptoms:Won’t start, Will Not Start
-
Part# 216594300 replaces these:AP2113607, 446903, 3204486, 3204565, 5303210975, 5303273998 ... Show more , 5303290255 Show less
- Works with the following brands:
- Frigidaire, Kenmore, Gibson, Kelvinator
- Works with the following products
- Refrigerator, Freezer, Dehumidifier
- Fixes the following symptoms
- Won’t start, Will Not Start
- Part# 216594300 replaces these:
- AP2113607, 446903, 3204486, 3204565, 5303210975, 5303273998, 5303290255
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Scott from Watkins Glen, NY
- Parts Used:
- 216594300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Freezer stopped cooling
On the compressor are two components. The first is the start relay which allows voltage to pass through to the compressor when it's called to run by the thermostat. The second is the thermal override which protects the compressor by shutting it down when over heated. Both are plugged into the three compressor power prongs. Thermal is plug
... Read more
ged into the top prong, starter relay to the two lower prongs. To start the repair, pull the two wire leads off of the components. Take a pair of needle nose pliers and gently pull out the starter relay. Next pull out the thermal override. Make sure the compressor windings aren't bad by testing the leads with an ohm meter. There are how to's on the web but basically place the ohm meter in its lowest setting and take a reading between the two bottom prongs. Write this number down. It should have a resistance of about 10.5 ohms. Next, take a reading between the top and bottom left prongs and then do the same on the right side. Add the left and right reading together and they should equal the initial reading that you took across the bottom prongs (10.5ohms) or so. If not, your compressor is the issue. If all tests out OK, replace the start relay in the reverse order of disassembly. The switchout takes all of 15 minutes to perform. Made my freezer like new.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX426380
Manufacturer Part Number: 216594300
Manufacturer Part Number: 216594300
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.