OEM Whirlpool Range Element with Limiter 6 Inch - 1200W [W10823711] | Ships Today | Fix.com
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
Element with Limiter 6 Inch - 1200W – Part Number: W10823711 Element with Limiter 6 Inch - 1200W – Part Number: W10823711 Element with Limiter 6 Inch - 1200W – Part Number: W10823711 https://fixcom.azureedge.net/Schematics/Maytag/45821.gif

Element with Limiter 6 Inch - 1200W

Your Price
$114.76

Fix Number: FIX11764915

Manufacturer #: W10823711

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

Sold individually. This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.

Works with the following brands

Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Kenmore, Inglis, Crosley, Admiral

Works with the following products

Range, Cooktop, Microwave Oven Combo

Fixes the following symptoms

Element will not heat | Will Not Start

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 14 reviews
Customer:
Rameish from Clermont, FL
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Previous element was burnt and not functioning
First, disconnected the power, open the two screws on top front of stove, lifted the top surface and located the nonfunctional element. Secondly, disconnected the feed from the main electric supply that feeds the element. Finally,removed defected element and reconnected the new element to the electric supply by matching terminal and wire color and reassembled the top lid of stove. Upon completion, the burner was successfully operable.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
ronald from Land O Lakes, FL
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Surface element no longer worked
followed the on line instructional video on the web site. It was easy to do
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Diane from West Salem, WI
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Element will not heat
I found that one of the 6" elements would not heat. I removed the glass top (2 Philips screws) underneath and one molex connector for the cables. I confirmed with my DVM without having to remove the element that it was open (defective). There are three different 6" element part numbers that can used with this stove and the first two numbers of the serial number indicate what element 'kit' is needed. The element itself between three kits is the same, but the new Thermo-switch is different from what is factory installed and adapter wires are needed in order to connect to the Thermo-switch connectors "1b" and "2a". Before removing the defective element, label the cables on how they hook up to the Thermo-switch (2a, 1b, 2b) because they are in different positions between the old Thermo-switch and the new thermo-switch. Connector "1a" is in same because it connects direct to the element. The heater kit also comes with hook-up instructions.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
AVIS from LIVERPOOL, NY
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 surface elements stop working
Watched the attached video. Followed the instructions, easy as pie. Saved at least leeway $100.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Wong from Carver, MA
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
The surface element was burn out.
First I switched off the breaker ,Then I used the nut driver to remove the 2 screws underneath the stove top. Then lift up the stove top and propped up with a box and then I used the nut driver to remove 2 addition screws that held the element .Matched up the wiring then plugged the new element in put the screw backed. It took about 15 to 30 minutes.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Mike from Florence, MT
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Surface element shorted out. Ceramic top range.
The new element was a perfect match. Unplugged range, remove 2 screws each corner of ceramic top, lift top up, my wife held top up while I changed out element. 1 /4" nut driver remove 2 screws with clips on each side of old element, unplug wires, old element is out. Match wiring on new element. Take off holding clips off old element match to new element, reinstall. Let ceramic top down, reinstall screws, plug range in, check out burner, works perfect, your done.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Beverly from Rocky Mount, VA
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
One of the 6" elements on my smooth top range stopped working.
After first watching DIY videos, I decided it looked simple enough to fix it ourselves. I phoned , and spoke with a very helpful Customer Service agent who was knowledgeable about the specific part that we needed. I placed the order late in the afternoon, and it was delivered to my door the very next day! My husband watched the video on the website that showed step by step how to replace the element. This was extremely helpful, and we would highly recommend that you take the time to do this before you begin your repair. Within 30 minutes, we had the new element installed and it worked perfectly! Thank you for saving us a very expensive service call on our Maytag range!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Charles from Newtown, CT
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Right rear burner stopped working
I followed the very clear directions given at the site: unplug the stove; remove the screws at each front corner holding the glass top onto the stove frame; pull the top forward and unplug the wire harness in the back; turn the top upside down on a padded table; unscrew the hold-down clamps for the burner; remove the wires from the old burner and put onto the new burner (one of them was a bit rusty so I used the brush to clean off that connector so that it would slide onto the spade on the burner easily); remove the burned out burner and put the new burner with wires connected into place; tighten down the hold-down clams (I had to replace one of the clamps with a new one because the original one was quite corroded); put the top back onto the stove and reconnect the wiring harness; push the top into place and replace the hold-down screws in the corners; plug the stove back in and try the burner; all burners now heating as expected.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jairo from West babylon, NY
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Surface element stop heating.
open the surface after removing two screws,take a picture of the electrical connection to the element;replace it with the new one and connected same way as the picture shows...please shut down the circuit breaker before doing any thing!!!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Mark from Mineral Wells, TX
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Electric coil burnt out
DISCONNECT THE POWER: replaced the surface element with limiter, by removing two screws that hold the glass surface in place (access inside the oven door jam). Removed 6 screws (Clearly obvious) to gain access to the surface elements. Removed and replaced the faulty element. Reversed process to complete
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Derrick from Cincinnati, OH
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The heating coil in the original element had burned through
I switched off the range relay in the power supply box in the basement, unscrewed the two metal screws under the front edge of the range top which hold it in place, and lifting the front edge up at a slight angle slid the whole range top forward until it was clear of the the control panel and set it aside. I eased the element mounting spring clips out of their mounting slots in the supporting plate one at a time, supporting the weight of the old element at he same time, then using needle nose pliers slid the wiring clips off of the element contacts. I unscrewed the mounting clips from the old element and screwed them into the replacement element in the similarly identified holes. I then reconnected and installed the new element, replaced the range top, and witched on the relay, doing everything in reverse order.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Martin from Sequim, WA
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Heating element stopped working
Same as other people who repaired their range elements. Very easy! The only thing I did which I don't recall anyone mentioning is that I marked the positions of the hold-downs on the bad element's back with a sharpie. I also took close-up pics of the wire locations/colors before removing the bad element.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Robert from Waterbury, CT
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Bad elelment
Watched YouTube video on how to do the repair. Don't be afraid to do this repair. What I watched was very close to what I had to do and was very helpful. The repair cost just $84.00 for the part and no labor. It would have cost me over $200.00 if I called a repair man. BTW I priced the part at a local parts store and it would have cost me $100.00 and I paid $*$.00 including shipping.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Mike from Shallotte, NC
Parts Used:
  • Element with Limiter 6 Inch - 1200W
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Heating element burn out
remove 2 screws holding top of stove,slide top out 2 inches and disc. wiring harness. Turn top over and unplug wires from element,unscrew holding clips(2). Out with the old and in with the new. reverse procedure. Step 1 should be to flip the circuit breaker!!!! I'm sure 240v doesn't feel good
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX11764915
Manufacturer Part Number: W10823711
Brand
Model Number
Description
Kenmore
22-.98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-.98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Kenmore
62260002600
Range
Kenmore
62260003600
Range
Kenmore
62260008600
Range
Kenmore
62260009600
Range
Kenmore
62945775
Range
Kenmore
62945776
Range
Kenmore
62945779
Range
Kenmore
62960002600
Range
Kenmore
62960002601
Range
Kenmore
62960002606
Range
Kenmore
62960003600
Range
Kenmore
62960008600
Range
Kenmore
62960008601
Range
Kenmore
62960008606
Range
Kenmore
62960009600
Range
Kenmore
62960009601
Range
Kenmore
62960009606
Range
Kenmore
66595775890
Range
Kenmore
66595775891
Range
Kenmore
66595776890
Range
Kenmore
66595776891
Range
Kenmore
66595779890
Range
Kenmore
66595779891
Range
Kenmore
66598002700
Range
Kenmore
66598002701
Range
Kenmore
66598003700
Range
Kenmore
66598003701
Range
Kenmore
66598009700
Range