Part Location Diagram of 74004053 Whirlpool Top Burner Igniter
See part 13 in the diagram
Replacing your Maytag Range Top Burner Igniter
( Grid squares measure 1x1 inch )

Top Burner Igniter

★★★★★
★★★★★
1 Review

Rated by 9 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$41.20
In Stock
Fix Number:
FIX2082000
Manufacturer #:
74004053
Manufactured by:
Whirlpool

Product Description

This top burner igniter comes with a mounting bracket.

Videos For installing this part.

Replacing your Top Burner Igniter

Replacing your Top Burner Igniter

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
January 22, 2022
One burner ignites the other doesn't. Does that mean it is the top spark ignitor? This is a jenn-air where their are 2 burners in a tray
For model number jds9860aap
Fix.com logo
Hello Thomas, Thank you for your inquiry. We have researched the model number you have provided and if only one burner is igniting, the most likely parts are the burner spark igniter, and the spark module. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 9 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Justin from Edinboro, PA
Parts Used:
WP74005890, 74004053
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
No spark when I tried to light the burners
1) remove the cook top tray by lifting up on the back of it and gently pull it backwards 2) now that the cooktop tray unit is removed, remove two screws from each side and lift the drip pan off of the base tray 3) use pliers to gently pull down on the metal clip that holds the wire to the top burner igniter of both burners 4) remove t wo screws that hold the igniter in place in gently remove it 5) place the new igniter in through the hole, and reattach the two screws that hold it in place. 6) I broke one of the wires and had to replace the spark igniter set ( wire harness). This was done easily by removing two screws replacing igniter set, then replacing the screws. 7) reattach the wires to the bottom metal prong of the top burner igniter. Do this for both burners. 8) gently set the drip tray back into the lower tray. Be careful to line up the tubing which will carry gas to the burner with the holes in the lower tray. 9) replace two screws on each side that hold the drip tray to the lower tray 10) gently replace the entire tray unit, being careful to first line up the metal prongs with the holes in the front of the unit. You should now be ready to cook again!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Hal from Chatsworth, GA
Parts Used:
WP3403M075-10, 74004053
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Rusted gas burners
Removed 4 burners from cooking module.A hammer works from the bottom of the burner to loosen up all the rust.Cleaned all the rust off the burner plate.Before installing the new burners. I filled the inside bottom cavity with muffler repair paste from Auto Zone.It comes in a plastic container. The purpose is to keep the burner from rusting over time when hot and exposed to air and failing again.Installed the burners in the pan and coated the exposed metal with same repair paste.Let the unit dry for 2 days.Installer ignitor parts.Installed gas feed tubes, Ground wire from both ignitor base screws to bottom cover screw. The purpose is to assure a good ground to base.Re-connected feed wire to ignitor base plugThe biggest cause of module failure is rust. Placed units back in the unit and no problems.All four burners fired right up.$190.vs $600 new modules. This will probably last for years.Jen Air is not going to be very happy that I won't be buying their whole module replacement package @ $300 each every three years.If you pay 3 grand for a cooktop it should last longerThanks guys for making individual parts available.It takes a little time but, in the long run, it's worth it!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
william from Shelton, WA
Parts Used:
74004053
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
old and cracked igniters
removed cook top tray, inverted it and unscrewed igniters. installed new ones but had to straighten metal tip ever so slightly to install. once in place, re-adjusted tip(think of spark plugs because that's all they are) Because of cook top age, decided to replace burners as well. To unscrew well seasoned and rusty burners, just tap on the m and they will become loose enough to unscrew. Well worth the investment(mamma is happy)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Grover Beach, CA
Parts Used:
74004053
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Pilot igniters were chipped and would not ignite the burners
Lifted out the individual burners, removed old ignitors and replaced them with the new ones.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from Mulberry, FL
Parts Used:
WP3403M075-10, 74004053
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Top burner heads and igniters on slide in gas stove\oven were rusted and corroded
We did not do the repairs ourselves. We hired a gas company technician to exchange the new head and igniter for old. We were surprised that the burner heads did not come with the screws necessary to complete the job. The technician had to locate screws in his personal collection.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia Vander from Kentwood, MI
Parts Used:
74004053
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Burner would not ignite (no spark)
I followed the directions on the enclosed video from this site..Easy Peasy I saved so much money probably at least 100 dollars just for the repair call.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ethel from Stone Mountain, GA
Parts Used:
74004053
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Burner would not light any more
My son took it apart did a little adusting installed and it went quickly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Long Beach, MS
Parts Used:
74004053
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Two igniters were worn out, would not light the gas.
Removed the burners, detached the two wires, unscrewed the two screws on the old igniters, and put the new ones in, screwed them up, connected the wires, and put the burners back in place. Nothing to it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from San Dimas, CA
Parts Used:
74004053
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Igniter not working
Since it was a sealed burner I had to take the Sealed Burner Cartridge out and turn upside down. I removed about 7 screws to remove the back cover to expose the two burner ignitors. After that it was a simple replacement with one small screw.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
4.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    0
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX2082000
Manufacturer Part Number: 74004053
Brand
Model Number
Description
Magic Chef
31003SAA
Range - Freestanding, Gas
Magic Chef
31003SAW
Range - Freestanding, Gas
Magic Chef
31203KAW
Range - Freestanding, Gas
Magic Chef
31203PAA
Range - Freestanding, Gas
Magic Chef
31203PAQ
Range - Freestanding, Gas
Magic Chef
31203PAV
Range - Freestanding, Gas
Magic Chef
31203SAA
Range - Freestanding, Gas
Magic Chef
31203SAW
Range - Freestanding, Gas
Magic Chef
31203WAA
Range - Freestanding, Gas
Magic Chef
31203WAW
Range - Freestanding, Gas
Magic Chef
31213SAA
Range - Gas
Magic Chef
31213SAW
Range - Gas
Magic Chef
31213WAA
Range - Gas
Magic Chef
31213WAM
Range - Gas
Magic Chef
31213WAV
Range - Gas
Magic Chef
31213WAW
Range - Gas
Magic Chef
31213XAA
Range - Gas
Magic Chef
31213XAW
Range - Gas
Magic Chef
61S04PAA
Range - Gas
Magic Chef
61S04PAW
Range - Gas
Magic Chef
61S14WAA
Range - Gas
Magic Chef
61S14WAW
Range - Gas
Magic Chef
61S14XAA
Range - Gas
Magic Chef
61S14XAB
Range - Gas
Magic Chef
61S14XAW
Range - Gas
Magic Chef
8241RA
Cooktop - Gas
Magic Chef
8241RB
Cooktop - Gas
Magic Chef
8241RS
Cooktop - Gas
Magic Chef
8241RT
Cooktop - Gas
Magic Chef
8241RV
Cooktop - Gas