Part Location Diagram of WP3403M075-10 Whirlpool Burner Head
See part 20 in the diagram
( Grid squares measure 1x1 inch )

Burner Head WP3403M075-10

Rated by 3 customers 

?

Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$158.44
In Stock
Fix Number:
FIX11741675
Manufacturer #:
WP3403M075-10
Manufactured by:
Whirlpool

Product Description

This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.

Questions and Answers

Be the first to ask our experts a question about this part!

View More View Less
Top Burner Igniter
$23.89
In Stock
Brass Seal
$8.04
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 1.9 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Hal from Chatsworth, GA
Parts Used:
WP3403M075-10, 74004053
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Rusted gas burners
Removed 4 burners from cooking module.A hammer works from the bottom of the burner to loosen up all the rust.Cleaned all the rust off the burner plate.Before installing the new burners. I filled the inside bottom cavity with muffler repair paste from Auto Zone.It comes in a plastic container. The purpose is to keep the burner from rusting over time when hot and exposed to air and failing again.Installed the burners in the pan and coated the exposed metal with same repair paste.Let the unit dry for 2 days.Installer ignitor parts.Installed gas feed tubes, Ground wire from both ignitor base screws to bottom cover screw. The purpose is to assure a good ground to base.Re-connected feed wire to ignitor base plugThe biggest cause of module failure is rust. Placed units back in the unit and no problems.All four burners fired right up.$190.vs $600 new modules. This will probably last for years.Jen Air is not going to be very happy that I won't be buying their whole module replacement package @ $300 each every three years.If you pay 3 grand for a cooktop it should last longerThanks guys for making individual parts available.It takes a little time but, in the long run, it's worth it!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Woodland, CA
Parts Used:
WP3403M075-10
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
rusted out burner head and the gas was coming from all sides and didn't ignite efficiently
the cost for an entire burner assembly was as high as $400 so I was thrilled to discover just the burner head for $30. this would have been a lot easier had the wire not rusted out so I had to do a little electrical work. water gets in there from boil overs excetera and starts to corrode all the metal. the burner head itself fit in ver y nicely and was super easy to install and worked perfectly the first time and ever since. I am so thankful to this site and would recommend this installation for anyone, what a great savings!!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from Mulberry, FL
Parts Used:
WP3403M075-10, 74004053
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Top burner heads and igniters on slide in gas stove\oven were rusted and corroded
We did not do the repairs ourselves. We hired a gas company technician to exchange the new head and igniter for old. We were surprised that the burner heads did not come with the screws necessary to complete the job. The technician had to locate screws in his personal collection.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11741675
Manufacturer Part Number: WP3403M075-10
Brand
Model Number
Description
Jenn-Air
JDS9860AAB
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860AAP
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860ACB
Range
Jenn-Air
JDS9860ACP
Range - Slide-in, Electric-Gas Combo
Jenn-Air
JDS9860BCP
Range
Jenn-Air
JDS9861AAP
Range
Jenn-Air
JGA8100ADB
Cooktop
Jenn-Air
JGD8130ADB
Cooktop
Jenn-Air
JGD8130ADB21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8130ADS
Cooktop
Jenn-Air
JGD8130ADS21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8345ADB
Cooktop - Gas
Jenn-Air
JGD8345ADB21
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8345ADB22
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8348BDP
Cooktop
Jenn-Air
JGD8348CDP
Cooktop
Jenn-Air
JGD8348CDP16
Cooktop - 48" GAS BUILT-IN DOWNDRAFT COOKTOP
Jenn-Air
JGD8348CDP17
Cooktop - 30" GAS BUILT-IN DOWNDRAFT COOKTOP