Part Location Diagram of WB44T10014 GE Bake Element
See part 251 in the diagram
( Grid squares measure 1x1 inch )

Bake Element WB44T10014

Works With Model 91193602000!

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$93.95
In Stock
Fix Number:
FIX249289
Manufacturer #:
WB44T10014
Manufactured by:
GE
Works With Model 91193602000!

Product Description

This bake element is found on the bottom of the oven.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Joseph from Kirkland, WA
Parts Used:
WB44T10014
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
The female connectors easly slip back into the oven connector opening
Had to remove the back plate on the range and push the connectors back into the oven. Then the connection was then very easy to finish. The connector wires are short for a good reason, so put a clip on them as you remove the old bake element. And then you will not have a problem connecting them to the element.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eugene from Oak Island, NC
Parts Used:
WB44T10014
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Bake element failed.
With nut driver , remove two screws supporting bake element to rear wall of oven. With pliers, disconnect two wires from old bake element. Had to use pliers as old connections were corroded. Connect existing wires to new element. I was able to do this by hand, easy fitting connection to new element. Install the two screws supporting the new element to the back wall of the oven with nut driver. Very easy removal, installation. Total time, less than 15 minutes.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from North Kingstown, RI
Parts Used:
WB44T10014
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Old Bake Element burned out.
To replace the bake element I took the front door of the oven off, removed the two screws in the back of the oven holding the element in place. Then I carefully pulled the element away from the insulation until the wire connections were exposed. Next, I disconnected the wires from the old element and connected them to the new element. Finally I positioned the new element back in place, screwed in the two screws and replaced the door.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX249289
Manufacturer Part Number: WB44T10014
Brand Model Number Description
Kenmore 91193501990 Range
Kenmore 91193501991 Range
Kenmore 91193508990 Range
Kenmore 91193508991 Range
Kenmore 91193581990 Range
Kenmore 91193581991 Range
Kenmore 91193582990 Range
Kenmore 91193582991 Range
Kenmore 91193587990 Range
Kenmore 91193587991 Range
Kenmore 91193588990 Range
Kenmore 91193588991 Range
Kenmore 91193600010 Range
Kenmore 91193601000 Range
Kenmore 91193601002 Range
Kenmore 91193602000 Range
Kenmore 91193602002 Range
Kenmore 91193604010 Range
Kenmore 91193607000 Range
Kenmore 91193607002 Range
Kenmore 91193608000 Range
Kenmore 91193608002 Range
Kenmore 91193609020 Range
Kenmore 91194600300 Range
Kenmore 91194601300 Range
Kenmore 91194602300 Range
Kenmore 91194604300 Range
Kenmore 91194609300 Range
Kenmore 91194752010 Range
Kenmore 91194754010 Range