Part Location Diagram of WB13T10045 GE Oven Igniter
See part 316 in the diagram
( Grid squares measure 1x1 inch )

Oven Igniter

Rated by 5 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$157.75
In Stock
Fix Number:
FIX952863
Manufacturer #:
WB13T10045
Manufactured by:
GE

Product Description

This part is used to light the oven for the bake or broil.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Douglas from Staten Island, NY
Parts Used:
WB13T10045, WB1X1293
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
oven would not work
broiler and range worked.oven did not.take off oven door by flipping up clips. remove bottom tray and racks. i soaked the screws with wd40 after hearing in other posts how they all snapped . they came out easy. pulled out igniter and unsnapped it from plug. snapped in new one . i put new crews in. reassembled and it fired right up. very e asy. part was 105 with shipping
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jorge from Hayward, CA
Parts Used:
WB13T10045
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Igniter would not come on
Remove oven door, remove lower covers, replace igniter
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Florence, AZ
Parts Used:
WB13T10045
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Both mounting screws were galled to the burner tube.
Both mounting screws broke off when I attempted to remove them. After reading the narratives on this site, I expected at least one of them to break. In hind sight, if I had applied a little olive or vegetable oil to the screws and allowed them to sit, they might have broke free without breaking. I don't know about using any other kind of oil in the oven. Even with proper cleaning, that smell might be difficult to get rid of. Since both screws broke, I had to remove the burner tube and drill out the stuck portions of the old screws. I got lucky and managed not to damage the threads. The wire and connector for the old igniter were not hung up inside the oven wall and came out freely when pulled upon. Once the new igniter was installed and the oven re-assembled everything worked fine.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Bokeelia, FL
Parts Used:
WB31T10114, WB13T10045
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench set
igniter no longer ignnted
followed instructions, which were incorrect. plug disconnect is in back of range, so range must be pulled out from wall. as everyone said, one of the 2 screens mounting the igniter broke very easily, so just replaced one and is working fine. pasrtsselect is a standup company and will recommend.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janet from Stuart, FL
Parts Used:
WB13T10045
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Broiler worked but oven didn't.
Removed oven door then the bottom tray. Remove the igniter with 2 small screws. Pull the cord from where it was fed. It's a simple plug and then reassemble. Plug and play. Saved the ridiculous price of a service call and cleaned my oven while I was at it. Total time was probably 10 minutes. Cleaning the oven took a little longer.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX952863
Manufacturer Part Number: WB13T10045
Brand
Model Number
Description
General Electric
JGS905BEK1BB
Range - Gas
General Electric
JGS905BEK2BB
Range - Gas
General Electric
JGS905BEK3BB
Range - Gas
General Electric
JGS905KEK1CC
Range - Gas
General Electric
JGS905KEK2CC
Range - Gas
General Electric
JGS905KEK3CC
Range - Gas
General Electric
JGS905KEKC
Range - GE Range/Stove/Oven Model JGS905KEKC Parts
General Electric
JGS905SEK1SS
Range - Gas
General Electric
JGS905SEK2SS
Range - Gas
General Electric
JGS905SEK3SS
Range - Gas
General Electric
JGS905SEKS
Range - GE Range/Stove/Oven Model JGS905SEKS Parts
General Electric
JGS905TEK1WW
Range - Gas
General Electric
JGS905TEK2WW
Range - Gas
General Electric
JGS905TEK3WW
Range - Gas
General Electric
JGS905TEKW
Range - GE Range/Stove/Oven Model JGS905TEKW Parts
General Electric
JGS968BEK1BB
Range - Gas
General Electric
JGS968BEK2BB
Range - Gas
General Electric
JGS968BEK3BB
Range - Gas
General Electric
JGS968BEK4BB
Range - Gas
General Electric
JGS968BEKB
Range - GE Range/Stove/Oven Model JGS968BEKB Parts
General Electric
JGS968BH1BB
Range - Gas
General Electric
JGS968BH2BB
Range - Gas
General Electric
JGS968BH3BB
Range - Gas
General Electric
JGS968BH4BB
Range - Gas
General Electric
JGS968BH5BB
Range - Gas
General Electric
JGS968BH6BB
Range - Gas
General Electric
JGS968KEK1CC
Range - Gas
General Electric
JGS968KEK2CC
Range - Gas
General Electric
JGS968KEK3CC
Range - Gas
General Electric
JGS968KEK4CC
Range - Gas