Part Location Diagram of WB27X45466 GE CONTROL OVEN TO9
See part 16 in the diagram
( Grid squares measure 1x1 inch )

CONTROL OVEN TO9 WB27X45466

Rated by 8 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$198.26
In Stock
Fix Number:
FIX16873547
Manufacturer #:
WB27X45466
Manufactured by:
GE

Product Description

This part is also known as the "brains" of the appliance. ***NOTE: The wiring could be different than the original control. This part may need to be installed by an appliance repair person.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 8 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Michael from HOLLY RIDGE, NC
Parts Used:
WB27X45466
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
No power to display screen..oven not working
Replace it the way it was.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brian from Wheat Ridge, CO
Parts Used:
WB27X45466
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
No clock and no oven controls
Installed a new electronic board. Taking off the control plate to install it on the new one was difficult part of the button panel peeled off on the old control board.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Ozark, AL
Parts Used:
WB27X45466
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
no visual lighting or oven control..nothing shown on graphics
turn off power to range. remove metal cover on back. unplug color coded wires. remove the 4 screws that retain the control board. remove the complete control board. remove the graphics (CAREFULLY TO AVOID DAMAGE TO GRAPHIC COVER) placement on new control board is critical, but simple to do with gentle care. install new control board. . mi ne is working as it should.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Regina from Noblesville, IN
Parts Used:
WB27T11424, WB27X45466
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
5 days before Christmas, I shorted out the Control Panel...
Very simple...used a nut driver (can use screw driver) there is 4 screws to take off back panel (on back behind the stove knobs. I bought the New Face plate for I read it was easy to damage the old one, when trying to remove it. I attached the New Face Plate to the Control Panel before I got started. Unplug your Range before you get star ted (thats how I blew the control panel to begin with) There are 4 screws on the control panel. Remove them. The electronic plugs can be difficult to pull off, so I used neddle nose pliers to jiggle them lose. The color coding on the control panel makes it easy to get your wires back into the right spot. Took me 15-20 minutes. Simple
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Tidioute, PA
Parts Used:
WB27X45466
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Controll board would not respond.
Remove back panel on range remove four screws connect wires to control board remove graphic cover off old board carefully reinstall.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from phoenix, AZ
Parts Used:
WB27X45466
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Shorted Out Control Panel
Pulled out range from wall ,, (unplug) removed back covers , locate control panel , ok to unplug panel wires before removing on this model wires are color coded, then unscrew hold down screws and remove , on this model there is a control face panel , if your's is still in good condition you can remove this with a hair dryer and a utility knife , face plate is glued on . . . . Heat with hair dryer do not melt ,, gently slice under plate to cut it free from glue . . . Pull gently not to bend or crack face plate . . After removing should be enough glue still on panel to place on new control panel and start install. . . . . . . .
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Heather H from Douglas, MI
Parts Used:
WB27X45466
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Electronic control died from lightning strike
Really couldn't believe the on line repair instructions as it seemed too easy, but it was correct. We ( me supervising ) did all the obvious--- unplugged,pulled the range out, unscrewed the back panel, took a photo of wire placement just in case, peeled the thingy with the numbers off of the dead control,undid the wires . Put the sticky thing back on the new control, and merely matched the color to the wire on the back. Put the whole thing back in. Ran a quick test with power before replacing all the screws. Presto--it worked ! Replaced all the back panel screws. It took all of 12 minutes. Cleaning under the range took longer---yuck ! Thank you so much.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
george from mcminnville, TN
Parts Used:
WB27X45466
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
no control on heating elements or oven
ordered part simple plug and play. if i had noticed that the face didn't come with the control board i would have ordered it.. it was a little bit of a problem to remove the old face but i managed and replaced it.. working great
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX16873547
Manufacturer Part Number: WB27X45466
Brand
Model Number
Description
General Electric
137480
Range
General Electric
137481
Range
Kenmore
91192090300
Range
Kenmore
91192090301
Range
Kenmore
91192091300
Range
Kenmore
91192091301
Range
Kenmore
91192812300
Range
Kenmore
91192812301
Range
Kenmore
91192814300
Range
Kenmore
91192814301
Range
Kenmore
91193090300
Range
Kenmore
91193090301
Range
Kenmore
91193091300
Range
Kenmore
91193091301
Range
Kenmore
91193490300
Range
Kenmore
91193812300
Range
Kenmore
91193812301
Range
Kenmore
91193814300
Range
Kenmore
91193814301
Range
Kenmore
91194400300
Range
Kenmore
91194400301
Range
Kenmore
91194401300
Range
Kenmore
91194401301
Range
Kenmore
91194401993
Range
Kenmore
91194402300
Range
Kenmore
91194402301
Range
Kenmore
91194404300
Range
Kenmore
91194404301
Range
Kenmore
91194410300
Range
Kenmore
91194411300
Range