953545-1-M-GE-WB24X10129-Fan Switch
Part Location Diagram of WB24X10129 GE Fan Switch
See part 23 in the diagram
953545-1-S-GE-WB24X10129-Fan Switch 360 view
( Grid squares measure 1x1 inch )
953545-1-S-GE-WB24X10129-Fan Switch 953545-2-S-GE-WB24X10129-Fan Switch 953545-1-S-GE-WB24X10129-Fan Switch 360 view
Part Location Diagram of WB24X10129 GE Fan Switch

Fan Switch

Rated by 1 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$14.41
In Stock
Fix Number: FIX953545
Manufacturer #: WB24X10129
Manufactured by: GE
  • Product Description

    This is the replacement fan switch for your range hood. When you turn the knob to turn the range fan on, the fan switch is actuated. If your fan will not turn on when the knob is turned, you most likely have an issue with the fan switch. The fan has a main square portion with a red center that connects to the fan control knob. The main portion is approximately 1 inch in diameter. This part is sold individually. Be sure to disconnect the power source from your range before you begin this repair.

  • Works with the following brands
    General Electric
  • Works with the following products
    Range Hood
  • Part Number Cross Reference
    Part# WB24X10129 replaces these:
    AP3754226, 1086018
3 Related Parts Questions and Answers
1 Installation Instruction Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This is the replacement fan switch for your range hood. When you turn the knob to turn the range fan on, the fan switch is actuated. If your fan will not turn on when the knob is turned, you most likely have an issue with the fan switch. The fan has a main square portion with a red center that connects to the fan control knob. The main portion is approximately 1 inch in diameter. This part is sold individually. Be sure to disconnect the power source from your range before you begin this repair.

  • Works with the following brands:
    General Electric
  • Works with the following products:
    Range Hood
  • Part# WB24X10129 replaces these:
    AP3754226, 1086018

Questions and Answers

Be the first to ask our experts a question about this part!

KNOB
$12.21
Part Number: FIX952246
$12.21
In Stock
Light Switch
★★★★★
★★★★★
(1)
$13.00
Part Number: FIX953546
This is the replacement light switch for your range. It comes with the actual switch, and the hex nut that goes with it. The switch is approximately 1 ¼ inches by 1 ¼ inches, and the hex nut is approximately ½ an inch in...
$13.00
In Stock
Hex Nut
$8.06
Part Number: FIX2321035
$8.06
Special Order

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Thomas from Wildwood Crest, NJ
  • Parts Used:
    WB24X10130, WB24X10129
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
plastic stems broke replaced both switches
Turn off circuit breaker to vent hood. Note how narrow wire channel cover fits into switch cover underneath hood. Remove range burners and sit on range facing switch cover for access to screws with small Phillips head screwdriver. Remove both back wire cover and switch cover screws. Remove covers. Remove plastic control knobs on front by pulling straight off. Do not twist. With pliers or wrench remove two locking nuts. Light switch has three wires. Fan switch has four. Note wire colors and corresponding numbered slots on back of switch. Using end of large paper clip push into wire slot behind wire to loosen spring tension and carefully pull wire straight out. Do all wires in one switch at a time. Keep wire end straight and insert into correct numbered slot on new switch. Do not overtighten locking nuts upon reassembly. Replace knobs. Screw switch cover back on and then narrow wire cover. Turn circuit breaker on. Test new switches.
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX953545
Manufacturer Part Number: WB24X10129
Brand
Model Number
Description
General Electric
AV447FBS
Range Hood
General Electric
AV447FWS
Range Hood
General Electric
JV247P1WW
Range Hood
General Electric
JV248P1SS
Range Hood
General Electric
JV347H1BB
Range Hood - Electric
General Electric
JV347H1CC
Range Hood - Electric
General Electric
JV347H1WW
Range Hood - Electric
General Electric
JV347H2BB
Range Hood
General Electric
JV347H2CC
Range Hood
General Electric
JV347H2WW
Range Hood
General Electric
JV348L1SS
Range Hood - Electric
General Electric
JV348L1SSC
Range Hood
General Electric
JV348L2SS
Range Hood
General Electric
JV367H1BB
Range Hood - Electric
General Electric
JV367H1CC
Range Hood - Electric
General Electric
JV367H1WW
Range Hood - Electric
General Electric
JV367H2BB
Range Hood
General Electric
JV367H2CC
Range Hood
General Electric
JV367H2WW
Range Hood