Powermatic Table Saw Parts

Start With Your Model Number

Need help finding your model number?

Find Parts Fast

Guaranteed Fit

Repair Videos

Popular Powermatic Table Saw Parts

Ball Bearing

$41.67

In Stock

Add to cart

Fix Number

FIX10463888

Manufacturer Part Number

BB-6203ZZ

This ball bearing is 17 mm and fits a variety of gardening power tools. The ball bearing has two contact rubber seals on each side and two non-contact metal shields on each end as well. Tip: if your tools needs only one seal or shield, then take off one of the shields or seals from this ball bearing. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.

Installation Instructions

Adam from FREMONT, NE

Saw was making loud screeching noise and unsatisfactory cuts

1: disconnect power and remove blade
2: remove spanner nut
3: remove arbor nut. Spins opposite:
righty loosy lefty tighty
4: remove arbor with mallet and dowel
5: use arbor press to take off ball bearing
6: press on new bearing Read more...

Belt

$36.62

In Stock

Add to cart

Fix Number

FIX10459604

Manufacturer Part Number

6077225

This is a Genuine Manufacturer Sourced replacement part used on a Powermatic 66 10-Inch Table Saw. This part is made out of Rubber Material and it is Sold Individually. Clean the pulleys off before putting the new belt on to ensure top performance and longevity with your new belt. Inspect belts periodically and replace when worn to maintain peak performance.

Ball Bearing

$70.72

In Stock

Add to cart

Fix Number

FIX10463890

Manufacturer Part Number

BB-6204VV

This is a genuine Powermatic and Jet part sourced directly from the manufacturer for use in planers, saws, and jointers. The ball bearing fits between the gear and the oil seal. A screwdriver may be necessary during the installation of this item. It may become broken or wear down and will need to be replaced. This is available as an individual replacement part and is made of metal.

On/off Switch (3hp 1ph. 230 Vo

$243.02

On Order

Add to cart

Fix Number

FIX10463239

Manufacturer Part Number

6816292

This switch controls power to 3 HP, 1-phase machines and includes overload protection. Replace if the machine won’t start or shows electrical issues. Always disconnect power before installation.

Linking Plate

$20.20

In Stock

Add to cart

Fix Number

FIX10394926

Manufacturer Part Number

PM2000-305

This is an authentic OEM component from Jet. The linking plate helps to secure the blade guard side shields. A wrench and hex key are necessary for the replacement. The metal linking plate is sold individually.

Flat Washer, M8

$8.83

In Stock

Add to cart

Fix Number

FIX10517157

Manufacturer Part Number

TS-1550061

This flat washer is designed to fit a variety of power tools. The washer helps distribute the pressure evenly between parts and has multiple applications depending on your specific tool. Check the diagram for the accurate location in your tool. *Please note: this part is sold individually.

Flat Washer

$7.56

Special Order

Add to cart

Fix Number

FIX10467627

Manufacturer Part Number

TS-1550031

This flat washer fits the following tools: saws, drills, planer jointers, and angle grinders. The washer helps prevent nuts and bolts from tearing or pulling through material because it creates a bearing surface. *Please note: This part is sold individually. Refer to the diagram provided by the manufacturer for installation instructions. Remember to unplug or turn off power on tool before beginning this installation.

Flat Washer

$8.83

In Stock

Add to cart

Fix Number

FIX10467628

Manufacturer Part Number

TS-1550041

This washer fits table saws, as well as other gardening tools. This washer provides a tight seal between parts. For the accurate location and application in your specific tool, refer to the diagram provided by the manufacturer. *please note: this part is sold individually.

Scale, Tape 3/4 X 53-in.

$37.88

In Stock

Add to cart

Fix Number

FIX12051311

Manufacturer Part Number

6687008

This is a genuine Powermatic replacement part. The scale tape is designed by the manufacturer for use on a cabinet saw. This part is made of flexible plastic with an adhesive backing, and is used to measure the distance from the fence to the saw blade. No tools are required when replacing this item. Simply remove the old part, peel off the protective backing, and carefully stick the new part in place. This part is sold individually.

Hex Nut

$10.10

In Stock

Add to cart

Fix Number

FIX10467494

Manufacturer Part Number

TS-0561031

Powermatic Table Saw Appliance Types

• Table Saw Parts
• Powermatic Parts

Related Powermatic Table Saw Parts

• Powermatic Table Saw Bearings
• Powermatic Table Saw Brackets and Flanges

Popular Powermatic Table Saw Models

• PM2000 (1792001K) 10-inch Cabinet Saw
• PM2000 (1791998) 10 in. 5HP 230V 1 Phase TEFC Cabinet Saw
• PM2000 (1791997) 10 in. 5HP 230V 3 Phase TEFC Cabinet Saw
• PM2000 (1792018K) Pm2000 3ph Table Saw Parts With 50inch Accufence And Workbench (1792018k)
• PM2000 (1792010K) Pm2000 1ph Table Saw Parts With 50inch Accu-Fence System (1792010k)
• PM2000 (1792003K) 10-inch Cabinet Saw
• PM2000 (1792012K) Pm2000 1ph Table Saw Parts With 30inch Accu-Fence System (1792012k)
• PM2000 (1792007K) Pm2000 3ph Table Saw Parts With 30inch Accu-Fence System (1792007k)
• PM2000 (1792017K) Pm2000 1ph Table Saw Parts With 50inch Accu-Fence And Workbench (1792017k)
• PM2000 (1791999) 10 in. 3HP 230V 1 Phase TEFC Cabinet Saw
• PM2000 (1792005K) Pm2000 3ph Table Saw Parts With 50inch Accu-Fence System (1792005k)
• PM2000 (1792016K) Pm2000 1ph Table Saw Parts With 50inch Accufence And Workbench (1792016k)
• PM2000 (1792006K) Pm2000 3ph Table Saw Parts With 50inch Accu-Fence System And Rout-R-Lift (1792006k)
• PM2000 (1792002K) 10-inch Cabinet Saw
• PM2000 (1792000K) 10-inch Cabinet Saw
• PM2000 (1792013K) Pm2000 1ph Table Saw Parts With 30inch Accu-Fence System And Rout-R-Lift (1792013k)
• PM2000 (1792011K) Pm2000 1ph Table Saw Parts With 50inch Accu-Fence And Rout-R-Lift(1792011k)
• PM2000 (1792008K) Pm2000 3ph Table Saw Parts With 30inch Accu-Fence System And Rout-R-Lift (1792008k)
• 66 10-Inch Table Saw
• 64A (1791271K) 10 in. w/50 in. Rails- 27 x 36 Extension Table- Legs- Route-R-Lift Contractors Tabl