Ball Bearing
-
Product Description
This ball bearing is 17 mm and fits a variety of gardening power tools. The ball bearing has two contact rubber seals on each side and two non-contact metal shields on each end as well. Tip: if your tools needs only one seal or shield, then take off one of the shields or seals from this ball bearing. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.
-
Works with the following brandsJet, Powermatic
-
Works with the following productsPlaner Jointer, Table Saw
Product Description
This ball bearing is 17 mm and fits a variety of gardening power tools. The ball bearing has two contact rubber seals on each side and two non-contact metal shields on each end as well. Tip: if your tools needs only one seal or shield, then take off one of the shields or seals from this ball bearing. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.
-
Works with the following brands:Jet, Powermatic
-
Works with the following products:Planer Jointer, Table Saw
Questions and Answers
Be the first to ask our experts a question about this part!
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
-
Customer:Adam from FREMONT, NE
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Socket set, Wrench (Adjustable), Wrench set
2: remove spanner nut
3: remove arbor nut. Spins opposite:
righty loosy lefty tighty
4: remove arbor with mallet and dowel
5: use arbor press to take off ball bearing
6: press on new bearing
- < Prev
- 1
- Next >
Manufacturer Part Number: BB-6203ZZ