OEM Delta Miter Saw Parts & Accessories

Belt

$23.96

Fix Number: FIX10322779
Manufacturer Part Number: 422171330002

This is a genuine OEM sourced replacement belt used on Delta miter saw. It is used to drive the spindle that spins the blade. This item is made out of rubber and it is sold individually. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • Remove the belt cover • Replace the old belt with the new one • Secure the housing

Lower Guard Assembly

$23.05

Fix Number: FIX16675056
Manufacturer Part Number: DPEC004625

Miter Saw Brush

$22.52

Fix Number: FIX12021560
Manufacturer Part Number: 1348266

This is an OEM replacement carbon brush, sold individually. To ensure your motor is running smoothly and efficiently, it is advised to inspect the carbon brushes every few months, as they are prone to regular wear. The carbon brush has an important job of conducting electrical current, so if worn, your tool will not function as it should. If your tool is smoking or burn marks are present, it is advisable to also check the condition of the armature, as this could indicate more serious motor problems.

M6 X 1 X 16mm Button Head Scre

$6.51

Fix Number: FIX10319207
Manufacturer Part Number: 1345880

An OEM replacement part, this is sold individually. This screw is used to hold various parts securely in their place. An Allen wrench is needed to properly tighten and loosen this screw. Compatible with the power tools listed below.

Switch

$86.21

Fix Number: FIX12021801
Manufacturer Part Number: 899883

This is an original replacement part manufactured for use with miter saws. Switches wear out from normal use, and are one of the first parts to break down on power tools. Replacing a worn out switch can be an easy fix, and extend the life of the saw. A screw driver is required to install the switch, please note the switch is sold individually.

Carbon Brush

$9.89

Fix Number: FIX16674995
Manufacturer Part Number: DPEC003962

Blade Guard

$54.95

★★★★★

3 Reviews

Fix Number: FIX12021828
Manufacturer Part Number: 902881

This blade guard provides essential safety by shielding users from accidental blade contact and helping direct debris away during cutting. A damaged or missing guard increases risk and reduces cutting accuracy. Replacement restores safety compliance and improved operator protection.

BRUSH

$14.92

Fix Number: FIX18979810
Manufacturer Part Number: 1313113

This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.

Installation Instructions

Dwayne from Millville, NJ

Broken belt (motor runs, blade didn't turn)

1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.

Cleaning and testing took as long as changing the belt and inspecting brushes. Read more...