OEM Craftsman Circular Saw Parts & Accessories

Outer Blade Clamp

$8.77

Fix Number: FIX10166063
Manufacturer Part Number: 145343-01

This is a genuine replacement outer blade clamp specially made for circular saws. This part helps to secure the blade to the unit. A wrench would be needed to remove the blade bolt when replacing this clamp. It is made out of metal and it is sold individually.

Watch the install video

Power Cord

$40.44

Fix Number: FIX10169913
Manufacturer Part Number: 330079-98

It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

Brush and Spring

$13.91

★★★★★

1 Review

Fix Number: FIX10166057
Manufacturer Part Number: 145323-06

This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for damage, cracks, and burns. It is common to replace the brushes repeatedly as they easily wear off from friction and use. Tip: remember to inspect your armature for burns and cracks when replacing your carbon brushes. This will help identify larger motor problems. This part measures to 3/4 inches in length, 1/2 inches in width, and the 1/4 inches in thickness. Refer to the manual for installation instructions and a list of the parts included.

Fixes these symptoms

Won't turn on
See more...

Watch the install video

Holder

$33.41

Fix Number: FIX10166161
Manufacturer Part Number: 147097-09

This is a genuinely sourced carbon brush and holder. This carbon brush includes the holder, terminals, and spring, making it ready for installation. Consider replacing both brushes at the same to ensure even wear and peak motor performance. Be sure to inspect the carbon brushes frequently to keep your equipment running smoothly for years to come.

Watch the install video

BRUSH SET

$6.51

Fix Number: FIX19507670
Manufacturer Part Number: 1619X08020

Genuine manufacturer supplied replacement brush set designed for use with Craftsman worm drive saws. Due to constant contact with an armature brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. This assembly includes two (2) carbon brushes with lead wires and springs attached. Please note brush caps are sold separately. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • Remove the brush cap and take out the old brush • Secure the new brush with a cap and test the saw

Assembly Brush

$6.40

Fix Number: FIX11857088
Manufacturer Part Number: 290075051

This brush assembly is an authentic Ryobi item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with circular saws and electric cultivator. This assembly includes (1) metal brush holder and (1) carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Please note, the hardware to secure this assembly is sold separately. Replacing this brush assembly is a simple task that should only require a screwdriver.

BLADE BOLT

$6.51

Fix Number: FIX19510494
Manufacturer Part Number: 2610000050

Bolt

$6.51

Fix Number: FIX10166064
Manufacturer Part Number: 145344-00

This is an OEM part sourced directly from the manufacturer. The screw is found in Craftsman circular saws. This is a metal part, used to hold other components to the spindle assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

Watch the install video

Retaining Ring

$6.51

Fix Number: FIX10166028
Manufacturer Part Number: 144803-00

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

Cord Protector

$8.70

★★★★★

3 Reviews

Fix Number: FIX10173396
Manufacturer Part Number: 445338-00

This is a cord protector, also known as a strain relief, for your power tool. This part will slip into place at the end of your cord, snug against your power tool. The durable rubber will protect the base of your cord from being bent, pinched, or exposed. This part will eventually wear down and potentially crack or snap off, and exposed wire is a hazard. We recommend replacing the cord protector when damage is visible.

Craftsman Circular Saw Parts

Popular Craftsman Circular Saw Parts

Craftsman Circular Saw Appliance Types

Related Craftsman Circular Saw Parts

Popular Craftsman Circular Saw Models

Craftsman Circular Saw Parts

Start With Your Model Number

Popular Craftsman Circular Saw Parts

Craftsman Circular Saw Appliance Types

Related Craftsman Circular Saw Parts

Popular Craftsman Circular Saw Models