Makita Band Saw Parts

Makita Appliance Parts

Popular Makita Band Saw Parts

Rubber Tire
$6.51
In Stock
Fix Number
FIX10151469
Manufacturer Part Number
424589-8
This high quality rubber tire is a genuine OEM sourced item that is utilized on Makita band saws. It is secured over the wheel drives the blade to provide traction. Over time these rubber tires stretch and harden allowing blade to slip. When putting the new tire on a band saw wheel it may seem too small however it really is not. These tires will typically come approximately two or more inches smaller than the old tire that is being replaced. You will need to put the new tire in warm water to heat the tire making it pliable enough to stretch. Please note one durable rubber tire is included per order.
Rubber Tire
$20.99
Special Order
Fix Number
FIX10151048
Manufacturer Part Number
421333-4
Genuine Manufacturer Approved replacement Wheel Tire for some Makita Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.
Switch Sgel 115cdy-6
$28.36
In Stock
Fix Number
FIX10153603
Manufacturer Part Number
651284-9
This is an OEM replacement part used with Makita sanders/routers. This switch is what allows user to turn the unit on and off. It is plastic a plastic switch with metal terminals. Over time mechanical moving components of a switch will begin to fail requiring a replacement. Please note this item is sold individually. To complete this repair you will need a screwdriver. • Remove housing • Disconnect wires • Remove old switch • Install new switch • Re-attach wires • Reassemble and test the unit
Flat Washer 4
$6.51
In Stock
Fix Number
FIX10155889
Manufacturer Part Number
941051-3
This is an authentic replacement part manufactured Makita power tools. The flat washer is commonly used to disperse pressure across a wider area on a part assembly that is applied by a nut or bolt. This flat washer is used with multiple types of power tools, please see model diagram for part location and usage. The flat washer is sold as an individual replacement part.
Ball Bearing
$9.13
In Stock
Fix Number
FIX10141483
Manufacturer Part Number
210033-9
This Ball Bearing is shielded on both sides. It is a genuine Makita replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Flat Washer 6
$6.51
In Stock
Fix Number
FIX10155894
Manufacturer Part Number
941152-7
This is an authentic manufacturer sourced replacement part. It is commonly used on a variety of Makita power tools. It is used to distribute the pressure evenly between two connected parts. Since this washer is a standard hardware that has multiple applications, it is recommend to check appropriate diagrams for correct location and use of it. This part is made out of metal and it is sold individually.
H.s. Head Bolt M6x18
$6.51
In Stock
Fix Number
FIX10145196
Manufacturer Part Number
265484-1
This is an authentic manufacturer-sourced part that is specially made for use with Makita equipment. It is a standard hardware which may have multiple applications, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality bolt is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware.
Switch Sgel215c
$40.91
In Stock
Fix Number
FIX10153585
Manufacturer Part Number
651225-5
This is a Trigger switch that has 4 leads and a locking mechanism for the trigger. This authentic Makita replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all. • The variable speed function and electric braking aren't working properly.
Hex Socket Head Bolt
$6.51
In Stock
Fix Number
FIX10144148
Manufacturer Part Number
251981-3
Authentic replacement bolt designed for use with Makita power tools. It is a standard bolt which has multiple uses based on a tool. Please refer to appropriate diagrams for correct application. This is a hex socket head bolt, so you would need a hex key/allen wrench in order to secure or loosen it. It is sold individually.
Stopper Plate
$6.55
In Stock
Fix Number
FIX10149077
Manufacturer Part Number
345467-8
This part is an OEM from Makita. The stopper plate is compatible with many band saw models. This metal component is fastened to the gear housing, holding the project material in place for cutting. For the repair, you will need a hex key and a pair of pliers. The stopper plate is sold individually.

Makita Band Saw Appliance Types

Popular Makita Band Saw Models