OEM DeWALT Band Saw Parts & Accessories

Shoulder Bolt

$6.51

Fix Number: FIX10183732
Manufacturer Part Number: 650736-00

This is a Genuine Manufacturer Approved replacement part used on certain Dewalt Band Saws. The purpose of this Bolt is to attach Ball Bearings to Bearing Block. This item is made out of Metal and is Sold Individually.

Ball Bearing

$7.19

Fix Number: FIX10180919
Manufacturer Part Number: 605040-66

This bearing is authentic OEM. It is used in some models of DeWALT band saws. Ball bearings hold and stabilize rotating parts to ensure low friction movement. With regular use, bearings should be replaced often. Sold separately.

Carbon Brush

$6.51

★★★★★

1 Review

Fix Number: FIX10186156
Manufacturer Part Number: 949646-01

This is a Genuine Manufacturer Sourced replacement part used on Dewalt Grinders. This is a Carbon Brush with Lead Wire attached which is Sold Individually. Please note Brush Holder and Spring are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.

Tire

$6.63

Fix Number: FIX9963925
Manufacturer Part Number: 5140103-20

It is a genuine manufacturer approved replacement wheel tire which is specially designed for Dewalt band saws. Its purpose is to provide grip for the saw blade. When putting the tire on a band saw wheel, it may seem too small but it is not. band saw tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. As the tire ages the rubber will harden and allowing the blade to slip. You would need to put the new tire in hot/warm water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process. This part is made out of rubber and is sold individually.

SWITCH

$28.21

★★★★★

1 Review

Fix Number: FIX18993335
Manufacturer Part Number: N224532

This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are: • The tool has stopped functioning - it refuses to start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.rnrn3.5" L 7/8" Depth 3/4" W

$6.51

Fix Number: FIX10183731
Manufacturer Part Number: 650732-00

This pin fits between the bearing block and the ball bearing and is available as an individual replacement part. This is a small part made of metal and will need to be replaced if it gets lost or broken. It is a genuine OEM sourced part which is specially designed for use with DeWALT band saws. A set of pliers and an allen wrench may be needed to replace this pin.

Bearing

$6.51

Fix Number: FIX9963944
Manufacturer Part Number: 5140103-40

This authentic DeWALT replacement part is found in assorted band saw types. Bearings are moving parts that facilitate rotational motion and position of various shafts/axles. As high wear components, bearings are replaced relatively often. Sold individually.

Roller

$6.51

Fix Number: FIX9963948
Manufacturer Part Number: 5140103-44

This is an authentic DeWalt replacement part manufactured for use in portable band saws. This metal roller allows the blade to move through the guides. The roller is sold individually, although four are required.

Bail Handle

$16.38

Fix Number: FIX17016252
Manufacturer Part Number: N489902

This is an authentic DeWalt replacement part manufactured for use with band saws. The bail handle is the forward handle used to support the saw while in operation. This bail handle is sold as an individual replacement part, please note the knob and bolt used to mount the handle are available separately.

Ball Bearing

$6.55

★★★★★

1 Review

Fix Number: FIX10180918
Manufacturer Part Number: 605040-65

If your tool is making a squeaking or squealing sound, a worn bearing is a likely cause. Bearings are designed to lessen the friction between moving parts, so they are prone to deterioration over the life of your equipment. This part includes one OEM ball bearing which is sealed on both sides. Installation may vary depending on the model-type, but in general, this should be a quick and easy repair that can be easily done yourself.

DeWALT Band Saw Parts

Popular DeWALT Band Saw Parts

DeWALT Band Saw Appliance Types

Related DeWALT Band Saw Parts

Popular DeWALT Band Saw Models

DeWALT Band Saw Parts

Start With Your Model Number

Popular DeWALT Band Saw Parts

DeWALT Band Saw Appliance Types

Related DeWALT Band Saw Parts

Popular DeWALT Band Saw Models