OEM Black and Decker Band Saw Parts & Accessories

SWITCH

$34.07

Fix Number: FIX18993335
Manufacturer Part Number: N224532

This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are: • The tool has stopped functioning - it refuses to start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.rnrn3.5" L 7/8" Depth 3/4" W

WASHER

$6.51

Fix Number: FIX12475128
Manufacturer Part Number: 803435

This is a genuine OEM sourced replacement part which is specially designed for use with portable band saws. It helps to distribute the pressure evenly and provide a tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable composite material and is sold individually.

Guide

$26.03

★★★★★

1 Review

Fix Number: FIX10317252
Manufacturer Part Number: 1341607

The blade guide is what positions the blade in the band saw, ensuring a precise and clean cut. This blade guide is sourced directly from the manufacturer and is sold individually. It is recommended to replace all four at the same time (add to cart accordingly). As the blade wears down, the guide can be adjusted to compensate. Eventually, the guide will wear as well, and will need to be replaced.

WASHER

$6.51

Fix Number: FIX12455448
Manufacturer Part Number: 863134

This authentic manufacturer-sourced component is specially designed for use with Black and Decker, Porter Cable and DeWALT equipment. It helps to provide a tight seal between connected parts. This part provides an identical replacement for a missing or a faulty hardware that was included with a new unit. Please make sure to check the appropriate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality washer is made of durable rubber and is sold individually.

Watch the install video

BEARING

$21.14

Fix Number: FIX12492154
Manufacturer Part Number: 803858

This needle roller style bearing is an OEM part. It is commonly found in band saws produced by Porter Cable, DeWALT, and Black & Decker. Bearings are used to diminish friction between moving parts while also securing rotational angle. They need replacing fairly often because of this high wear role. Sold separately.

Tire

$124.91

Fix Number: FIX10317239
Manufacturer Part Number: 1341591

Genuine Delta Wheel Tire for Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

Watch the install video

CORD

$37.99

Fix Number: FIX12502150
Manufacturer Part Number: 879182

This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 7 Feet Long • Porter Cable models: 6302 T4, 6902 T5, T6

Watch the install video

SS/A HANDLE SET

$18.54

Fix Number: FIX12467035
Manufacturer Part Number: A03070

This is a Genuine OEM Sourced replacement part designed for use with Sanders and Band Saws. This item is made out of Plastic and it is Sold Individually. It includes Two (2) Pieces of the Knob. Please note the Screw used to secure this Knob is Sold Separately.

Cord/10ft./18-3

$33.60

Fix Number: FIX10169973
Manufacturer Part Number: 36480-98

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 10 Feet Long

Washer

$6.51

Fix Number: FIX9963654
Manufacturer Part Number: 5130830-00

This is a flat washer for your power tools. Most commonly it provides a tight seal for the connecting pieces inside the reel of your machine. It also helps distribute the pressure in your tool. To replace it you will need a screwdriver.

Black and Decker Band Saw Parts

Popular Black and Decker Band Saw Parts

Black and Decker Band Saw Appliance Types

Popular Black and Decker Band Saw Models

Black and Decker Band Saw Parts

Start With Your Model Number

Popular Black and Decker Band Saw Parts

Black and Decker Band Saw Appliance Types

Popular Black and Decker Band Saw Models