Makita Sander Polisher Wheels and Rollers

Fix Number

FIX10139240

Manufacturer Part Number

150978-8

Incl. 2 ea. Plane Bearing 12, 214116-7

Fix Number

FIX10147570

Manufacturer Part Number

323829-0

This is an original part from Makita. The tension roller shaft is made for use with the 9403 Belt Sander. This important component secures the tension roller to the tension roller arm. The metal tension roller shaft is sold individually. A screwdriver, pliers and an Allen wrench are often needed for the repair.

Fix Number

FIX10147425

Manufacturer Part Number

322746-1

The top pulley shaft goes next to the pulley and is made of metal. This item is priced as an individual replacement part. It is a genuine Makita replacement part for use in belt sanders. If this part becomes broken it will need to be replaced and may require a wrench set and a screwdriver during the installation.

Fix Number

FIX10140419

Manufacturer Part Number

162199-0

Fix Number

FIX10139525

Manufacturer Part Number

152585-3

It is a genuine item that is supplied by the original equipment manufacturer for Makita belt sanders. It is an identical replacement for a missing or faulty tension roller that was installed on a new unit, unfortunately, over time it will wear out or get lost eventually requiring a replacement. Keep in mind this high-quality part is made of durable material and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

Fix Number

FIX10146904

Manufacturer Part Number

317522-6

Fix Number

FIX10140506

Manufacturer Part Number

163398-7

This is an authentic Makita replacement part. The tension roller arm is designed by the manufacturer for use in a belt sander. This part is made of metal, and is used to hold the roller that can be moved to adjust the tension on the sanding belt. You may require a screwdriver and pliers when replacing this part. This item is sold individually.

Fix Number

FIX10139339

Manufacturer Part Number

151744-6

It is a genuine item that is supplied by the original equipment manufacturer for use with Makita belt sanders. The tension roller arm attaches to the lever and the roller. A screwdriver might be necessary during the installation of this part. It is made out of metal and will need to be replaced if it breaks. This item is sold individually.

Fix Number

FIX10139347

Manufacturer Part Number

151753-5

This is an authentic Makita replacement part manufactured for use with belt sanders. This metal roller is the idle front roller, and is used to provide tension on the sanding belt. The roller is adjusted using the knob on the side, please note the tension roller is sold individually.

Fix Number

FIX10140430

Manufacturer Part Number

162217-4

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Makita belt sanders. It is an identical replacement for a missing or faulty driving roller that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal with rubber and is sold individually.