OEM Jet Sander Polisher Parts & Accessories

Ball Bearing

$30.18

Fix Number: FIX10463892
Manufacturer Part Number: BB-6204ZZ

This is an authentic OEM replacement part used for various handheld power tools including models by Powermatic, Jet, and Wilton. Bearings stabilize and buffer moving parts to facilitate rotation of such parts as shafts, axles, and gears. They are commonly replaced due to this high wear function. This part sold individually.

Flat Washer, M8

$10.54

Fix Number: FIX10517157
Manufacturer Part Number: TS-1550061

This flat washer is designed to fit a variety of power tools. The washer helps distribute the pressure evenly between parts and has multiple applications depending on your specific tool. Check the diagram for the accurate location in your tool. *Please note: this part is sold individually.

Hex Nut

$35.67

Fix Number: FIX10467621
Manufacturer Part Number: TS-1540071

This is a hex nut for power tools. It is size M10, with a 1.5 thread pitch. This is the most common hexagonal fastener. It has internal threads that screw on to the shank of a hex cap screw, or a bolt.

Drive Wheel

$57.30

Fix Number: FIX10516127
Manufacturer Part Number: 5640521

This is a Wilton and Jet replacement part directly sourced from the manufacturer for use in sanders. The drive wheel attaches to the frame and is made of metal. During the installation process, an allen wrench and a set of pliers might be needed to replace this item. It will require replacing if it becomes broken. This part is available individually.

Idler

$60.49

Fix Number: FIX10516120
Manufacturer Part Number: 5640371

This item is sourced directly from the original equipment manufacturer. It is specially designed for use with Jet and Wilton sanders. The idler pulley helps to apply tension on the belt. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality material and is sold individually. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a wrench set to remove and secure the hardware that holds the idler.

Arbor Pulley

$105.12

Fix Number: FIX10515183
Manufacturer Part Number: 5511725

This is a genuine manufacturer-approved component which is specially designed for Jet and Wilton equipment. The purpose of this pulley is to apply tension to the belt. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this arbor pulley. It is a high-quality part is made of durable metal and is sold individually.

Hex Nut

$12.06

Fix Number: FIX10467494
Manufacturer Part Number: TS-0561031

Belt Tension Lever

$56.24

Fix Number: FIX10515002
Manufacturer Part Number: 5051021

The belt tension lever connects to the belt tension lever pin and is made of metal. Keep in mind this high-quality part is sold individually. This is a genuine Wilton and Jet part sourced directly from the manufacturer for use in sanders and milling machines. When replacing this part a screwdriver and a socket set may be needed. It might become broken and will need to be replaced.

Garnet Disk 10:

$16.58

Fix Number: FIX10515352
Manufacturer Part Number: 5513071

This genuine OEM sourced item is supplied directly from the original equipment manufacturer for use with Jet and Wilton belt and disk sanders. It is an identical replacement for a missing or a worn garnet disk that was included with a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality garnet disk is made of durable materials and is sold individually.

Ball Bearing

$49.40

Fix Number: FIX10463886
Manufacturer Part Number: BB-6202ZZ

This is an authentic OEM replacement part for certain models of Jet, Powermatic, and Wilton tools that is sourced from the manufacturer. To ensure that this will fit your tool, please see the "Model Cross Reference List" below. This part has an outer diameter of 1.5", and metal shielding on both sides. The bearing is used to reduce friction between two rotating parts. It keeps wear on the equipment to a minimum, and helps the mechanics run efficiently. Depending on how often you use your tool, your bearings will need routine replacement due to continual pressure on them. Signs of broken or failing Ball Bearings include squealing, screeching, or grinding noise when powering the device off. Each is sold individually.

Jet Sander Polisher Parts

Popular Jet Sander Polisher Parts

Jet Sander Polisher Appliance Types

Related Jet Sander Polisher Parts

Popular Jet Sander Polisher Models

Jet Sander Polisher Parts

Start With Your Model Number

Popular Jet Sander Polisher Parts

Jet Sander Polisher Appliance Types

Related Jet Sander Polisher Parts

Popular Jet Sander Polisher Models