OEM Delta Shaper Parts & Accessories

Roller

$65.08

Fix Number: FIX10316720
Manufacturer Part Number: 1340360

The roller attaches to the cover with the washer and the cap screw. This part is an OEM from Delta for use in stock feeder shapers. It is made out of metal and hard rubber and will need to be replaced if it stops turning. An allen wrench will be needed to replace this wheel. Keep in mind that this part is available as an individual replacement even though multiple rollers may be needed.

Key

$13.02

Fix Number: FIX10329808
Manufacturer Part Number: 927030102650S

The key attaches to the shaft and is made out of metal. This item is available individually. This is a genuine replacement part sourced from the original manufacturer for use with saws, drills, jointers, and shapers made by Delta. When replacing this part a set of pliers might be required during the installation process. It will require replacing if it becomes bent or broken.

Keps Nut

$6.51

Fix Number: FIX10327864
Manufacturer Part Number: 902012931513S

This is available as an individual replacement part. The keps nut attaches to the bracket and is made of metal. During replacement, it may require a wrench set to help install this item correctly. It will require replacing if it becomes broken. This is a genuine Delta replacement part used in compatible table saws, unisaws, and band saws.

Hex Nut

$6.51

Fix Number: FIX10327784
Manufacturer Part Number: 902010101300S

This is an original Delta replacement part manufactured for use with drill presses and table saws. The special hex nut has multiple applications depending on the model drill press or table saw. This hex nut is sold as an individual replacement part, please see model diagram for part location and usage.

Miter Gauge Assembly 63.38

$79.63

Fix Number: FIX10319050
Manufacturer Part Number: 1345226

This is an authentic replacement part manufactured for use with Delta table saws and routers. The miter gauge is used to change the angle of the cut. This miter gauge is as complete part assembly and is sold as an individual replacement part.

Bearing (for Recent Models Onl

$31.24

Fix Number: FIX10329672
Manufacturer Part Number: 920040107273

It is an authentic item that is supplied directly from original equipment manufacturer for use with Delta power equipment. This replacement bearing helps to secure the spindle while allowing it to rotate with minimal friction. For correct location and use of this item make sure to check appropriate diagrams of your equipment. Please note this durable metal bearing is sold individually.

Nut

$6.51

Fix Number: FIX10315685
Manufacturer Part Number: 1243476

This is an authentic replacement part manufactured for use with Delta power tools. The nut is used with a variety of different types of machines or tools and has different applications depending on the model of equipment. This nut is available as an individual replacement part, please see model diagram for part location and usage.

LOCK NUT

$6.51

Fix Number: FIX18981419
Manufacturer Part Number: 488871-00

This genuine manufacturer-sourced screw is made for Delta, Black and Decker and Porter Cable equipment. The nut is a standard hardware which may have multiple applications. Check the diagrams for your specific model to ensure the exact location and use of this part. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. One durable metal nut is included. A wrench will be needed to secure or remove it.

Roller

$42.60

★★★★★

2 Reviews

Fix Number: FIX10320282
Manufacturer Part Number: 1347963

It is an authentic item which is supplied by the original equipment manufacturer for use with Delta stock feeder shapers. The roller helps to feed the workpiece through the equipment. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the correct installation of this roller. You will need a screwdriver to remove the guard in order to perform this repair. One durable rubberized roller is included.

Handle

$35.50

Fix Number: FIX10322076
Manufacturer Part Number: 406030330001S

This handle is an OEM direct from Delta. The handle is made for use with a variety of power tools. The metal handle allows the operator to make the needed adjustments for projects. This handle is sold individually. A screwdriver, pliers, socket and wrench set are often required for the proper installation. Please refer to the specific manual for further repair instructions.

Delta Shaper Parts

Popular Delta Shaper Parts

Delta Shaper Appliance Types

Related Delta Shaper Parts

Popular Delta Shaper Models

Delta Shaper Parts

Start With Your Model Number

Popular Delta Shaper Parts

Delta Shaper Appliance Types

Related Delta Shaper Parts

Popular Delta Shaper Models