OEM Dremel Router Parts & Accessories

Lock

$6.55

Fix Number: FIX10259958
Manufacturer Part Number: 2610009839

This lock assembly includes one collar and one pin. It assists in locking the spindle shift. Over time, the pin can deteriorate, which results in it slipping. The retainer can also break. For this repair, start by removing the collet and collet nut, followed by the collar on the front of the tool. You will then need to disassemble the housing. You will now need to lift the motor and switch assembly out of the housing. The lock pin and retainer are located at the front of the housing and will need to be removed. The new lock can now be installed inside the tool.

Power Supply Cord

$14.95

Fix Number: FIX10260340
Manufacturer Part Number: 2615294041

This replacement power cord is supplied form original equipment manufacturer. It is specially made for Dremel rotary multi-tools. I plays a key role by delivering the electricity from the outlet to the tool. This cord is rubber insulated and it is sold individually. It does include a rubber grommet/sleeve. To complete this repair you would need a screwdriver. • Remove housing screws • Remove the housing • Disconnect wires from the old cord • Remove old cord • Secure the new power cord in place • Reattach wires • Reassemble and test the unit

Watch the install video

Brush & Spring Set

$11.81

Fix Number: FIX10259942
Manufacturer Part Number: 2610005646

These OEM replacement carbon brushes are sold as a pair and include a coiled spring attached. These brush and spring assemblies are what deliver power to a rotary tool armature. The spring transfers power and helps to secure the brush tightly in place. These brushes are in constant contact with the armature, which causes them to wear over time, and is the reason you should also inspect the armature regularly as well. If the tool is overloaded this can also cause the springs to burn. When performing this repair, be careful not to over-tighten the brush caps because they can crack.

Carbon Brush Set

$11.81

Fix Number: FIX17016959
Manufacturer Part Number: 2610053746

This is a manufacturer-sourced replacement carbon brush set designed for use with Dremel high-performance rotary tools. The set includes two carbon brushes and two metal springs, essential components that help maintain optimal motor performance. Carbon brushes are wear items that naturally degrade over time due to friction, and replacing them is a common and necessary part of tool maintenance. This OEM-quality set ensures a precise fit and reliable operation. Installation is straightforward and requires only a hex key (Allen wrench). To replace the brushes, simply remove the screws holding the tool housing together, separate the two halves, and remove the brush covers. Then, take out the old brushes and springs, install the new brush assemblies, reassemble the housing, and test your tool. Regular replacement of worn brushes helps extend the life of your rotary tool and keeps it running smoothly.

Motor Assembly

$24.72

Fix Number: FIX16318589
Manufacturer Part Number: 2610919750

This is an authentic replacement part manufactured for use with Dremel multi-tools. This is a complete motor and shaft assembly including the shaft bearing. The shaft supports the collet, collet nut, and locking pin that is used to secure the shaft when adjusting the collet. This part does not include the Collet or the Collet Nut and are sold separately. This motor assembly is sold individually.

Collet

$6.55

Fix Number: FIX10260325
Manufacturer Part Number: 2615110480

This is a Genuine Manufacturer Approved replacement part used on some Dremel Rotary Multi-Tools. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/8" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is sold separately.

Variable Speed On-off Switch

$32.09

★★★★★

1 Review

Fix Number: FIX10260136
Manufacturer Part Number: 2610912780

This is a Genuine Manufacturer Approved Dewalt replacement switch used on Dremel Multi-Tools. This part controls on/off and variable speed functions. Over time and because of use a switch will deteriorate and eventually fail requiring a replacement.

Watch the install video

Switch Assembly

$17.01

★★★★★

1 Review

Fix Number: FIX10259985
Manufacturer Part Number: 2610013852

Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

Coupling

$6.55

★★★★★

3 Reviews

Fix Number: FIX10260349
Manufacturer Part Number: 2615294309

This is an OEM coupling for multi-tools. It connects the armature and drive shaft. It also acts as a safeguard to the motor, by preventing it from burning if the drive shaft malfunctions. If your tool is left unused for a long stretch of time, this part can start to become brittle and deteriorate. This is a very popular repair part, so we suggest having a few of these in the tool box.

Installation Instructions

Stelford from BROOKLYN, NY

Armature not coupling with output shaft

Removed housing cap, removed 6 screws then separate housing then installed flex coupling between Armature and output shaft assembly. Then replaced, housing set, screws and housing cap Read more...

Collet Nut

$6.55

Fix Number: FIX10260006
Manufacturer Part Number: 2610014582

This part includes one manufacturer-approved collet nut for a multi-tool. The collet nut is what holds the bit in place. If your multi-tool will not hold a bit, this is one of the first components to inspect. It has a hexagonal shape so it can be fastened and unfastened with a wrench. To remove, press the shaft lock button and loosen the collet nut using the collet wrench.

Dremel Router Parts

Popular Dremel Router Parts

Installation Instructions

Dremel Router Appliance Types

Popular Dremel Router Models

Dremel Router Parts

Start With Your Model Number

Popular Dremel Router Parts

Installation Instructions

Dremel Router Appliance Types

Popular Dremel Router Models