OEM Delta Lathe Parts & Accessories

Fwd/rev Switch

$10.21

Fix Number: FIX10330983
Manufacturer Part Number: DPEC000470

This authentic manufacturer-supplied part is designed for use with Delta variable speed mini lathes. It is an identical replacement for a faulty or a missing reversing switch that was installed on a new equipment. The lathe comes ready to turn forward downwards toward the user for typical woodturning applications. However, some applications require the lathe to turn in reverse upwards away from a user. Refer to the owner's manual and the parts diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality reversing switch is sold as an individual item. A screwdriver will be needed to replace this component.

Lever

$22.52

Fix Number: FIX10325053
Manufacturer Part Number: 434080670002

This is an authentic OEM sourced component which is specially made for Delta equipment. The lever provides a user with a comfortable grip to make necessary adjustments, unfortunately, over time it may get damaged or lost eventually requiring a replacement. Keep in mind this high-quality item is made of durable material and is sold individually. It is an identical replacement for a missing or faulty component that was installed on a new unit, please make sure to check the diagrams of your model for the correct location and application of this lever.

Nut

$6.51

Fix Number: FIX10177018
Manufacturer Part Number: 5140032-25

The nut attaches to the flat washer and the rail lock lever. It is made out of metal and is sold individually. This is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT and Delta table saws. A wrench may be helpful when replacing this part. Over time this nut may strip or break and will need to be replaced.

Spindle

$32.95

★★★★★

1 Review

Fix Number: FIX10326090
Manufacturer Part Number: 5140059-31

It is a genuine item that is supplied by the original equipment manufacturer for use with Delta lathes. The spindle attaches to the face plate. A screwdriver might be necessary during the installation of this part. This item may become broken and will need to be replaced. It is made of metal and is sold individually.

V-belt

$96.98

Fix Number: FIX10316936
Manufacturer Part Number: 1340949

This is an authentic Delta replacement part. Package includes one belt designed for easy installation. • Belt Width - 1/4" • Belt Length - 25-1/2" Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

Brush

$9.89

Fix Number: FIX10326152
Manufacturer Part Number: 5140060-53

This is available as an individual replacement part. The brush is made out of metal and plastic. A set of pliers may be required to replace this item if it becomes broken. This item is an original part from Delta for use in lathes and planers.

Quill

$35.15

Fix Number: FIX10326102
Manufacturer Part Number: 5140059-53

Hex Jam Nut

$6.51

Fix Number: FIX10327792
Manufacturer Part Number: 902010201227S

This item has been sourced from the original manufacturer to be used with drill presses, band saws, sanders, bench grinders, lathes, radial arm saws, and finishing machines from Delta and Black & Decker. The metal nut is used with several different types of tools and the application of the nut can vary based on the model of the equipment.

Handle

$32.95

Fix Number: FIX10322076
Manufacturer Part Number: 406030330001S

This handle is an OEM direct from Delta. The handle is made for use with a variety of power tools. The metal handle allows the operator to make the needed adjustments for projects. This handle is sold individually. A screwdriver, pliers, socket and wrench set are often required for the proper installation. Please refer to the specific manual for further repair instructions.

On/off Switch

$39.55

Fix Number: FIX10330975
Manufacturer Part Number: DPEC000459

The on/off switch is made of plastic and metal. This part is available individually. It is an authentic OEM sourced item which is specially produced for use with Delta lathes. A screwdriver and a set of pliers may be required to replace this part. It will require replacing if it becomes broken.

Delta Lathe Parts

Popular Delta Lathe Parts

Delta Lathe Appliance Types

Related Delta Lathe Parts

Popular Delta Lathe Models

Delta Lathe Parts

Start With Your Model Number

Popular Delta Lathe Parts

Delta Lathe Appliance Types

Related Delta Lathe Parts

Popular Delta Lathe Models