Lathe Parts

Shop By Brand

Popular Lathe Parts

$27.06
  In Stock
Switch W/ Key
★★★★★
★★★★★
(10)
Fix Number FIX10325609
Manufacturer Part Number 489105-00
This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.
Installation Instructions
keith from EMPORIA, KS
Power switch would not turn saw off
unplugged power cord.
removed the nut holding the power switch assembly on the saw.
removed 3 screws from the back cover.
removed the 2 white wires and 2 black wires from the switch terminal post. pay attention to wire color on each post.
removed old switch from the bracket by squeezing the sides of the old switch to remove the switch from the bracket.
inserted the new switch in place in the opening.
re attached the wires to the spade terminal on the switch using the 4 terminals. black on the 2 posts top and bottom on one side and the other side white on the top and bottom.
re attach the switch assembly to the table saw
test operation
Read more...
$2.99
  In Stock
Nut,Hex
Fix Number FIX10169670
Manufacturer Part Number 330015-03
This hex nut with internal threads, screws to the shank of a bolt or a hex cap screw in a variety of lawn and gardening tools. It can have multiple applications depending on the tool you are using. To replace, you will need a wrench to loosen and tighten the nut. For detailed installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug tool from power source before beginning this repair project.
$46.40
  In Stock
Bearing
Fix Number FIX10329681
Manufacturer Part Number 920040205335
$30.94
  In Stock
Bearing
Fix Number FIX10329683
Manufacturer Part Number 920040205360
$15.46
  In Stock
Center Point
Fix Number FIX10326074
Manufacturer Part Number 5140059-02
$22.14
  In Stock
Ball Bearing
Fix Number FIX10166095
Manufacturer Part Number 146555-01
$34.58
  In Stock
Ball Bearing
Fix Number FIX10383263
Manufacturer Part Number BB-6004VV
$13.34
  In Stock
Ball Bearing
Fix Number FIX10383265
Manufacturer Part Number BB-6005VV
$5.80
  Special Order
Key
Fix Number FIX10318424
Manufacturer Part Number 1343758
This safety key fits multiple hardware tools and is inserted into the switch to make it possible for your machine to turn on and operate. Tip: you can remove the key to prevent unauthorized use of the machine. For installation instructions refer to the diagram provided by the manufacturer.
$9.01
  On Order
Nut
Fix Number FIX10397061
Manufacturer Part Number TS-1540061
This is a hex nut, and it is found in different power tools and outdoor equipment. It is one of the most common types of fasteners. The hex nut can screw on to bolts or hex cap screws because it has internal threads. This nut is sold individually and is size M8. This means it is 8mm in diameter, and features a 1.25 thread pitch.

Brands

Popular Lathe Models