Bostitch Nailer Springs and Shock Absorbers

Fix Number

FIX18992774

Manufacturer Part Number

H30608

This is a Genuine OEM sourced replacement part designed for use with Bostitch Staplers. This Spring connects the Pusher and the Top Guide of the Magazine. It is made out of Metal and it is Sold Individually. To replace this spring you would need pliers.

Fix Number

FIX12397982

Manufacturer Part Number

149859

This is a single OEM feed pawl spring for a nailer. This part holds the check pawl tightly against the nails, allowing it to feed correctly. The spring is known to weaken over time, which causes play in the pawl, leading to nail feeding problems. For this quick and easy repair, you may require a punch, pliers, and a screwdriver.

Fix Number

FIX18997128

Manufacturer Part Number

P0800002932

This is a genuine Bostitch replacement part. The Safety Pad is attached to end of the safety to prevent the material that it is being used on from getting marred or dented by the safety arm. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time.

Fix Number

FIX12425944

Manufacturer Part Number

180447

This is a genuine OEM sourced part that is intended to be used with pneumatic nailers and staplers from Bostitch, Porter Cable, and DeWalt. The metal spring is used to provide compression between the piston head valve and the end cap assembly. This item is sold as an individual replacement part.

Fix Number

FIX12529655

Manufacturer Part Number

N80120

The torsion spring attaches to the feed pawl. This is an authentic part from Bostitch for use in nailers. The spring is made out of metal and is priced individually. This part will need to be replaced if it becomes broken or bent. A socket set, a set of pliers, and a screwdriver may be needed during the installation process.

Fix Number

FIX10188991

Manufacturer Part Number

N233943

The return spring applies tension on the connected components of the return device. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. This part is sourced from the original equipment manufacturer. It is specially designed for use with DeWALT nailers. Please make sure to refer to the diagrams for your model for the correct location and application of this part. This high-quality return spring is made of durable metal and is sold individually.

Fix Number

FIX12455360

Manufacturer Part Number

854011

The metal compression spring is made of metal and goes between the check pawl and the door. This part is available as an individual replacement and is an OEM replacement part from the manufacturer Bostitch for use in nailers. Springs can lose their tension over time and will need to be replaced. A set of pliers and a socket set may be needed when replacing this spring.

Fix Number

FIX12401001

Manufacturer Part Number

174095

This is the constant force spring, also known as a pusher spring assembly, designed for use in various nailer nail-feeding mechanisms. Nailers, also known as nail guns, are essential tools for quickly and efficiently driving nails into materials, and this spring plays a critical role by attaching to the nail pusher to advance nails from the magazine to the driver. A clear sign that this spring needs replacement is if your nail gun fails to feed nails properly or does so inconsistently. To ensure the longevity of your nail gun and reduce the frequency of repairs, it is important to use the appropriate nails and perform regular maintenance. Replacing this spring is a straightforward process. Start by removing the magazine, disconnecting its securing screws and nuts. Take out the pusher from the magazine and slide the old spring off the pusher. Install the new spring onto the pusher, making sure it is properly seated. Then, reinstall the pusher mechanism into the magazine, ensuring that the top knob of the spring aligns with the notch in the magazine slot. Finally, put the magazine back in place and test the nail gun performance.

Fix Number

FIX18992777

Manufacturer Part Number

H30615

Fix Number

FIX18979740

Manufacturer Part Number

115143

This authentic OEM sourced replacement part is designed for use with Bostitch nailers. It provides spring action for the magazine. It is made out of metal with a plastic hub and it is sold individually. To complete this repair you would need a screwdriver.