Bostitch Nailer Legs and Feet

Bostitch Appliance Parts

Popular Bostitch Nailer Legs and Feet

Fix Number
FIX12420362
Manufacturer Part Number
179760
This is a single non-marking contact foot. This part attaches to the stapler safety plunger to cushion the plunger, so it does not harm your work piece. It is common for this part to get brittle and break off. To remove the damaged contact foot, use a screwdriver to pry it off. Align the new contact foot with the plunger so the notch is pointing towards the rear of the gun and push it into place. Very quick and easy repair.
PAD
$6.51
In Stock
Fix Number
FIX18990186
Manufacturer Part Number
9R196744
This is a non-marking contact foot, also commonly known as a no-mar foot. It is sold individually; however, it may be wise to have an extra on-hand as they tend to deteriorate or get misplaced. It attaches to the end of the safety element to help prevent marks in softwood applications. It is OEM-sourced and a guaranteed quality part.
Fix Number
FIX18979976
Manufacturer Part Number
149900
This contact arm foot assembly is an authentic part made specifically for Bostitch nailers listed below. This is the nailer's contact nose piece, connected to the trip assembly (part # 149899) with a spring (part # 149874) in between. Sold individually.
PAD
$6.51
In Stock
Fix Number
FIX18990230
Manufacturer Part Number
9R198756
This is a genuine OEM part. The Bostitch no mar contact foot is made of poly plastic, and is compatible with the BTFP71917 (Type 1) Smart Point 16 GA Finish Nailer Kit. This protective item is sold individually, and is fitted onto the contact trip. No tools are needed, as the contact foot snaps into place.
CONTACT FOOT-NO MAR
$6.51
In Stock
Fix Number
FIX18990366
Manufacturer Part Number
9R203909
This is an original part from Bostitch. The no mar contact foot is made for use with several angle finish nailers. The plastic item is fastened onto the trip assembly, and is sold individually. The no mar contact foot protects the surface from the nailer. No tools should be required for the repair.
ASSEMBLY, TRIP FOOT
$6.71
Special Order
Fix Number
FIX18979777
Manufacturer Part Number
121072
This item has been sourced from the original manufacturer to be used with pneumatic nailers from Bostitch. The trip foot attaches to the lower end of the contact arm and is used to provide a contact point that will not mar the material being nailed. This item is available as an individual replacement part.
FOOT
$6.51
In Stock
Fix Number
FIX18989925
Manufacturer Part Number
9R188782
This is a genuine manufacturer sourced replacement part designed for use with Bostitch finishing nailers. This nose cap also know as a contact foot or a no mar pad is attached to end of the safety element to prevent the material from dented by the pushing lever. Most people tent to keep a few extra on hand because these pads do have a tendency to get lost or crack over time. It is made out of durable plastic and it is sold individually. To replace this item you do not need any tools.
FOOT VINYL SIDING
$6.83
In Stock
Fix Number
FIX18989972
Manufacturer Part Number
9R189925
FOOT, TRIP
$6.51
In Stock
Fix Number
FIX18979775
Manufacturer Part Number
121070
This is a genuine manufacturer-sourced component which is specially designed for use with Bostitch nailers. It is an identical replacement for a missing or a faulty trip foot that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct installation of this part. Keep in mind this high-quality trip foot is made of durable material and is sold individually.
FOOT, TRIP, N89C
$6.51
In Stock
Fix Number
FIX18980083
Manufacturer Part Number
166765
This item has been sourced from the original manufacturer to be used with pneumatic nailers from Bostitch. The trip foot attaches to the bottom of the lower contact arm. This item is used to protect the leading edge of the contact trip. This item is sold as an individual replacement part.

Related Bostitch Nailer Parts