OEM Black and Decker Multi-Tool Parts & Accessories

Collet Nut

$6.51

Fix Number: FIX10174865
Manufacturer Part Number: 498615-03

Handle, Auxiliary

$6.51

Fix Number: FIX10170178
Manufacturer Part Number: 380087-00

This is an authentic replacement part manufactured for use with Black and Decker trimmers. The auxiliary handle is the forward handle used to provide greater control over the trimmer while the trimmer is in operation. This handle is sold individually, please note the hardware used to mount the handle is available separately.

Switch

$15.69

Fix Number: FIX10169156
Manufacturer Part Number: 324556-49

This is a genuine manufacturer-approved component which is specially made for use with DeWALT and Black and Decker hammer drills. It is the part of the tool handling on/off operations, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this part.

Brush

$6.51

Fix Number: FIX10169034
Manufacturer Part Number: 323660-00

Includes 1 Carbon Brush with wire lead attached. Genuine DeWalt replacement part. • Worn brushes are often the cause behind a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.

Slide On 12 Volt Charger (Weak Batteries Will Ruin This Charger)

$26.02

Fix Number: FIX11928774
Manufacturer Part Number: 90592360-01

This slide on 12 Volt charger is an authentic OEM sourced part designed for use with Dewalt and Black and Decker cordless drills and drivers. It connects to a standard outlet allowing user to charge the batteries. Keep in mind, a weak or defective battery can damage the charger. Please note, this item is sold individually.

Collet, 1/8 In.

$6.51

Fix Number: FIX11926332
Manufacturer Part Number: 419994-01

This high quality 1/8" collet is specially designed for use with Black and Decker and Dewalt rotary tools. It is a genuine item that is sourced directly from original equipment manufacturer. This part is used to secure the bits. Please note, this collet is for using bits with 1/8" arbors only. One metal collet is included per order. Keep in mind, the collet nut used to secure this part is sold separately. You will need a wrench to replace this part. • Remove the collet nut • Remove the old collet • Secure the new collet with the nut

Tip

$6.51

Fix Number: FIX10180059
Manufacturer Part Number: 582265-00SV

The tip is made out of plastic and attaches to the pad tip. This is an OEM part sourced directly from the manufacturer and used in Black & Decker sanders. If it becomes broken it will need to be replaced and a screwdriver will be needed for replacement. This tip is sold individually and includes a metal Phillips-head screw.

SERVICE SA ANVIL DCF899LR

$38.45

Fix Number: FIX17788679
Manufacturer Part Number: N918561

Collet 3/32

$6.51

Fix Number: FIX10170557
Manufacturer Part Number: 384387-00

This replacement collet is specially designed for use with Dewalt and Black and Decker rotary tools. It is an authentic OEM collet that is used for holding bits with 3/32" arbors only. Please note one durable metal collet is included per order and the collet nut that secures it is sold separately. Replacing this part is a simple task that should only require a wrench.

SA SANDER FOR PC

$14.74

Fix Number: FIX18988793
Manufacturer Part Number: 90583987

This is an authentic Porter Cable replacement part manufactured for use with a multi-tool. The platen is used as the sanding attachment. This platen is used to adhere to velcro sand paper pads. The platen can wear out from normal use, this replacement is sold individually.

Black and Decker Multi-Tool Parts

Popular Black and Decker Multi-Tool Parts

Black and Decker Multi-Tool Appliance Types

Popular Black and Decker Multi-Tool Models

Black and Decker Multi-Tool Parts

Start With Your Model Number

Popular Black and Decker Multi-Tool Parts

Black and Decker Multi-Tool Appliance Types

Popular Black and Decker Multi-Tool Models