Briggs and Stratton Generator Starters

Briggs and Stratton Appliance Parts

Popular Briggs and Stratton Generator Starters

Fix Number
FIX8942598
Manufacturer Part Number
281505S
This Genuine OEM ratchet pawl is a critical component designed to engage the recoil starting system with the engine, ensuring smooth and reliable starts. Manufactured from durable plastic, this replacement part is engineered to match the original specifications for a precise fit and dependable performance. Over time, a worn pawl can cause the recoil mechanism to slip, making it difficult to start the engine. Replacing it restores proper function and helps extend the life of your equipment. Sold individually, this part is ideal for routine maintenance or repair of compatible outdoor power tools.
Fix Number
FIX8981884
Manufacturer Part Number
497680
This authentic OEM starter assembly is designed for use with lawn and garden engines and is sourced directly from the original manufacturer to ensure quality and compatibility. The assembly includes a durable plastic shroud/housing, starter pulley, recoil spring, pull rope with grip, and the necessary hardware for installation. It functions as the primary mechanism for manually cranking and starting the engine. To complete the replacement, you’ll need a wrench. Simply remove the four screws and nuts securing the old starter assembly, then install the new one using the included hardware. This item is sold as a complete individual assembly.
Fixes these symptoms
  • Cannot pull starter cord out or engine will not turn over
  • See more...
Gear-pinion
$7.70
In Stock
Fix Number
FIX9066374
Manufacturer Part Number
695708
This is a manufacturer approved starter pinion gear designed for use with lawn and garden equipment engines. This Starter pinion gear is attach to the starter clutch drive and engages the flywheel to start the engine. It is made out of Plastic and Aluminum and it is Sold Individually.
Pulley-starter
$18.97
In Stock
Fix Number
FIX8942071
Manufacturer Part Number
295871
This starter pulley, also known as a recoil starter pulley, is sourced from the original manufacturer for use in outdoor power equipment. It includes the starter rope and plastic spool to hold the rope. Over time the rope may fray, tear, or the plastic spool may break. A faulty starter pulley will lead to difficulties pulling and retracting the rope, and starting the equipment. To replace the faulty parts, ensure the equipment is off and disconnected from power. Remove the starter housing/cover and remove the old spool and rope. Wind the rope around the new spool and tie a knot to secure it in place. Place the new spool and rope inside the starter mechanism and feed the end of the rope out of the hole in the housing. Reattach the starter cover to complete the repair.
Clutch-starter
$46.98
In Stock
Fix Number
FIX8968281
Manufacturer Part Number
399671
This starter clutch is an authentic OEM replacement part used in small outdoor power engines. Each package includes one clutch and one ball bearing. The starter clutch allows the engine to start by engaging the crankshaft to spin the engine and initiate combustion. Once the engine starts the clutch disengages to prevent over spinning. Over time the clutch may fail due to worn-down bearings, or damage to the clutch body, resulting in hard starting or failure to start. To replace it, first, disconnect the spark plug for safety. Then, remove the engine cover to access the starter clutch. Remove the clutch from the crankshaft, and thoroughly clean the mounting shaft. Install the new clutch by screwing it onto the crankshaft, then reassemble the engine cover and reconnect the spark plug.
Recoil Starter Assembly
$45.35
In Stock
Fix Number
FIX17016325
Manufacturer Part Number
28400-ZL8-033ZA
This replacement recoil starter assembly is commonly used with small Honda engines. This is the starter assembly that is used to pull start the unit. It is a complete assembly that includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws to attach this assembly are sold separately. Replacing this starter assembly is a simple task that should only require a screwdriver. • Make sure to disconnect the spark plug • Remove housing screws • Separate the old housing from the unit • Secure the new housing with the screws • Reattach spark plug and test the equipment
Plate-pawl Friction
$6.25
On Order
Fix Number
FIX9074726
Manufacturer Part Number
692299
This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note shroud/housing, starter pulley, starter spring, grip, the pull rope and the hardware are all sold separately. This pawl plate is made out of plastic and it is sold individually. To complete this repair you would need a wrench.
Motor-starter
$121.95
In Stock
Fix Number
FIX8983858
Manufacturer Part Number
497595
This starter motor is for lawn and garden equipment engines. Starter motor spins the flywheel to start the engine. Wear work gloves to protect your hands when installing this part.
Grip- Starter
$6.25
In Stock
Fix Number
FIX9935110
Manufacturer Part Number
28461-ZL8-003
A genuine OEM sourced replacement component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. This is the grip that attaches the starter rope that starts the engine. To attach the starter rope to the grip, push the rope thru the bottom hole in the grip, then bring it out the other side and tie a knot. Please note this durable plastic item is sold individually.
Solenoid
$35.02
On Order
Fix Number
FIX9064363
Manufacturer Part Number
691656
This replacement solenoid-starter is an authentic OEM component. It is specially designed for Briggs and Stratton engines commonly installed on generators and some other lawn and garden equipment. The solenoid transfers the electrical current from the battery to the starter. Unfortunately, over time it may wear out and develop electrical or mechanical issues eventually requiring a replacement to ensure your equipment runs properly. Note, it is a high-quality item and is sold as an individual component. You will need a wrench set to disconnect and remove the old solenoid-starter when performing this repair.

Related Briggs and Stratton Generator Parts