Official Briggs and Stratton Generator Hardware

Bolt

$6.51

Fix Number: FIX10021937
Manufacturer Part Number: 90043-ZL8-000

This is a genuine component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This bolt-stud helps to mount the cover-fan and the pull-starter. Please make sure to refer to the appropriate diagrams of your model for the correct application of this hardware. Keep in mind this high-quality bolt-stud is made of durable metal and is sold individually. Replacing it is a simple task that should only require a wrench set to remove the old and secure the new.

Key-flywheel

$6.51

Fix Number: FIX8925657
Manufacturer Part Number: 222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Bolt- Flange - 6x79 - Ct200

$6.51

Fix Number: FIX10021484
Manufacturer Part Number: 90004-ZL8-000

This bolt helps to secure muffler and carburetor to the short block. It is sourced from original equipment manufacturer for use with Honda small engines. Usually this bolt would need replacement if it is lost or has stripped threads. Please note this is a hex head bolt requiring a wrench for installation. It is sold individually.

Screw- Tappet Adjusting

$6.51

Fix Number: FIX10021659
Manufacturer Part Number: 90012-333-000

This is an authentic manufacturer-sourced part that is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or a damaged tappet adjusting screw that was installed on a new unit. The purpose of this item is to secure a valve rocker arm, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

Grommet

$6.51

Fix Number: FIX9064851
Manufacturer Part Number: 692187

Genuine OEM replacement Grommet used on Lawn and Garden equipment Engines. This Rubber breather grommet is used as a seal between Breather Assembly and the Breather Tube. Over time rubber grommet may dry out and crack so it should be replaced.

Pin, 3/32 X 1.6

$6.51

Fix Number: FIX9999596
Manufacturer Part Number: 703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Watch the install video

Clamp-hose

$6.51

Fix Number: FIX9140678
Manufacturer Part Number: 791850

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

Grommet

$6.51

Fix Number: FIX9294797
Manufacturer Part Number: 692189

This is an OEM replacement part, sold individually. This Grommet is an elbow for the crankcase breather tube. These rubber elbows were just a convenient way to make a 90 degree bend back when they used metal tubing. Compatible with the equipment shown below.

Fixes these symptoms

Will Not Start
See more...

Nut- Tappet Adjusting

$6.51

Fix Number: FIX10022451
Manufacturer Part Number: 90206-001-000

This is a genuine manufacturer-approved component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty nut that helps to secure the tappet adjusting screw. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

Lawn Mower Flat Washer

$6.51

Fix Number: FIX9999890
Manufacturer Part Number: 703590

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Briggs and Stratton Generator Hardware

Popular Briggs and Stratton Generator Hardware

Related Briggs and Stratton Generator Parts

Briggs and Stratton Generator Hardware

Start With Your Model Number

Popular Briggs and Stratton Generator Hardware

Related Briggs and Stratton Generator Parts