Black and Decker Generator Parts

Black and Decker Appliance Parts

Popular Black and Decker Generator Parts

NUT .375-16 HEX WHIZ
$6.51
In Stock
Fix Number
FIX18997472
Manufacturer Part Number
SSF-8111-ZN
WASHER .339/.344 ID
$6.51
Special Order
Fix Number
FIX18997477
Manufacturer Part Number
SSN-1014-ZN
It is a genuine item that is supplied directly from the original equipment manufacturer for use with gas and electric generators. This is one of the special washers that help to create a tight seal between the motor and the vibration mount, it provides an identical replacement for a missing or damaged hardware that was originally installed on the new equipment. Please note this high-quality metal washer is sold individually.
Nut
$6.51
Special Order
Fix Number
FIX10189259
Manufacturer Part Number
SSF-8150
CAP FUEL TANK
$34.38
On Order
Fix Number
FIX18992708
Manufacturer Part Number
GS-0443
This high quality replacement cap is an authentic OEM sourced item that is designed for use with generators. It is designed to keep the fuel in the tank. This fuel cap is made from durable plastic and it is sold individually.
ISOLATOR VIBRATION 1
$13.45
In Stock
Fix Number
FIX12521565
Manufacturer Part Number
GS-0033
This is a manufacturer approved isolator that is specially designed for use with electric generators. Its mounted between the motor and the frame to help minimize the vibrations caused by a running engine. One durable rubber isolator with a metal threaded shaft is included per order.
GROMMET, DRAIN COCK
$22.89
In Stock
Fix Number
FIX18993263
Manufacturer Part Number
N103455
This part includes one drain grommet for a generator. The drain grommet is placed into the fuel tank of the unit to hold the fuel drain cock. It can be shut off to stop fuel from escaping or opened, allowing the fuel to make its way to the generator. This is a simple repair that does not require the use of tools.
PRE-FILTER
$6.51
In Stock
Fix Number
FIX18989567
Manufacturer Part Number
90640311
This genuine OEM pre-filter in your vacuum is the first line of defense against larger debris and particles, preventing them from clogging the main filter and improving overall filtration efficiency. Positioned inside the dust bowl, you will know it is time for a replacement when the pre-filter appears visibly dirty or clogged, leading to reduced suction power and airflow. To remove the pre-filter, simply press the dust bowl release button on the handle, detach the dust bowl, and take out the filter from within. When installing the new pre-filter, securely attach it to the filter before placing it back into the dust bowl. It is advisable to replace the filter every 6 to 9 months, depending on usage frequency. Keep in mind that the pre-filter and filter are sold separately.
Keps Nut
$4.15
Special Order
Fix Number
FIX10108613
Manufacturer Part Number
5140112-21
TANK FUEL 7G SS
$258.20
In Stock
Fix Number
FIX18997563
Manufacturer Part Number
Z-GS-0795
This genuine OEM fuel tank, also known as the gas tank, in your generator serves as the primary storage for the fuel that powers the engine to produce electricity. Typically positioned on the top of the frame assembly, this gas tank measures 22 inches in length and 18.5 inches in width, with mounting holes positioned 16 inches apart at the center and 3 inches apart from each end of the tank. To determine if the fuel tank needs replacement, inspect it for damage, corrosion, rust, or any signs of leaks. To replace the tank, start by removing the securing screws and disconnecting the gas line. Drain the remaining gas into a container. Remove the gas valve from the old tank and take out the tank. Install the new gas valve onto the new tank and securely place the new tank. After reconnecting the gas line and filling the tank with gas, conduct a thorough check to ensure there are no signs of leaks.
CLAMP FUEL .50
$6.51
In Stock
Fix Number
FIX18992707
Manufacturer Part Number
GS-0227
This is an authentic Porter Cable replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The special clamp is used to secure the connections between fuel lines. This item is sold as an individual replacement part.

Black and Decker Generator Appliance Types

Popular Black and Decker Generator Models