Craftsman Vise Parts
Start With Your Model Number
Find Parts Fast
Guaranteed Fit
Repair Videos
Need help finding your model number?
Popular Craftsman Vise Parts
$5.00
In Stock
Vise Nut 5/8
Fix Number FIX11934905
Manufacturer Part Number 11114-15
Installation Instructions
Ted from MESA, AZ
Screw handle for vice
Put in proper model number that they had listed and the part was half the size needed. Not even close. Then they want you to pay for the return postage, which is what the part cost. Lousy!!!
Read more...
$8.30
On Order
Lock Bolt
Removed old lock nut & bolt.
Installed new lock nut and bolt.
Refastened vise to work bench.
Note: Lock Nut & Bolt was unavailable from Sears. Found a newer bench grinder with what appeared to be the same part and ordered it from this site . Sure enough, it worked perfectly. Part # was 11023487. Read more...
Fix Number FIX10196461
Manufacturer Part Number 11104S51
Installation Instructions
Robert from ALACHUA, FL
Lock Handle to tighten down vise was bent beyond repair
Removed Vise from work bench. Three bolts were holding it down.Removed old lock nut & bolt.
Installed new lock nut and bolt.
Refastened vise to work bench.
Note: Lock Nut & Bolt was unavailable from Sears. Found a newer bench grinder with what appeared to be the same part and ordered it from this site . Sure enough, it worked perfectly. Part # was 11023487. Read more...
$39.16
In Stock
Jaw Faces (4-1/2")
2. Install new vise jaws and replace four allen head screws using an allen wrench . Read more...
Fix Number FIX10225734
Manufacturer Part Number 87001S41
Installation Instructions
Orville from STANLEY, ND
My bench vise needed new jaws which were replaced by removing and replacing four allen head screws.
1. Remove four allen head screws using an allen wrench and the original broken vise jaws.2. Install new vise jaws and replace four allen head screws using an allen wrench . Read more...
$12.50
On Order
$21.58
In Stock
$7.36
In Stock
$7.24
In Stock
$13.04
In Stock
Scr&Handle
Fix Number FIX10225715
Manufacturer Part Number 87001-21
Installation Instructions
Ted from MESA, AZ
Screw handle for vice
Put in proper model number that they had listed and the part was half the size needed. Not even close. Then they want you to pay for the return postage, which is what the part cost. Lousy!!!
Read more...
$4.06
Special Order
$2.99
In Stock
Appliance Type
Popular Craftsman Vise Models
- 51865 Bench Vise
- 51871 Bench Vise
- 51861 Bench Vise
- 50651861 Bench Vise
- 351240790 Cross Vise
- 25985 Drill Stand With Vise
- 50651920 Craftsman Woodworkers Vise
- 351252641 2 1/2" Angle Vise
- 50651840 Machinists Vises
- 35125272 3" Standard Vise
- 1713235 Universal Jig
- 35125276 Cross Vise
- 351252731 4" Standard Vise
- 50651801 Bench Vise
- 35125274 Cross Vise
- 50651811 Bench Vise
- 50651810 Craftsman Bench Vises
- 50651871 Craftsman Bench Vise
- 900288930 Table Top Vise
- 351240890 Cross Vise