OEM Fein Electric Drill Parts & Accessories

Carbon Brush

$32.07

Fix Number: FIX10162900
Manufacturer Part Number: 30711136002

This is a carbon brush for your power tools. It powers the tool by conducting a current in the electric motor. It is made of carbon and has an attached lead wire. Depending on usage the carbon brush will wear down. Due to the constant contact with an armature, the part will eventually need to be replaced to keep your tool running efficiently.

Carbon Brush

$19.79

Fix Number: FIX10162887
Manufacturer Part Number: 30711067004

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Fein jigsaws. The carbon brush conducts an electrical current to the armature and motor. Carbon brushes are a common wear item, and it is recommended to be replaced often. This part is sold individually, though two are required and it is suggested to replace both brushes at the same time. For this repair you will need a screwdriver and a pair of needle nose pliers to aid you.

Protecting Sleeve

$6.66

Fix Number: FIX10163510
Manufacturer Part Number: 31413164009

This is an authentic Fein replacement part, sourced from the original manufacturer for use with power tools. The special protecting sleeve is commonly used to prevent damage to the cord where the cord enters the tool. This protecting sleeve is available as an individual replacement part, please see model diagram for associative parts.

Brush Holder

$17.49

Fix Number: FIX10162913
Manufacturer Part Number: 30712086027

This is an OEM part sourced directly from the manufacturer. The brush holder is found in Fein angle grinders and metal core drills. This part is made of high-quality plastic with metal connectors, and is used to hold the carbon brushes in place in the motor housing. You may require a screwdriver when replacing this part. This item is sold individually.

Groove Ball Bearing

$22.49

Fix Number: FIX10164473
Manufacturer Part Number: 41701001172

This is a groove ball bearing for your power tools. This part is sold individually. The groove ball bearing reduces friction between the rotating armature, and the motor housing in your power tools. It takes most of the pressure, so depending on how often you use your tool, it is a frequently replaced part.

Groove Ball Bearing

$21.87

Fix Number: FIX10164514
Manufacturer Part Number: 41701213011

This is an original Fein replacement part manufactured for use with rotary drills, jigsaws, and sanders. The bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This bearing can have various applications depending on the model of the tool. This bearing is available as an individual replacement part, please see model diagram for associative parts.

Carbon Brush

$52.83

Fix Number: FIX10162897
Manufacturer Part Number: 30711131000

It is a genuine item that is supplied by the original equipment manufacturer for use with Fein grinders. The purpose of this carbon brush is to conduct the current in an electric motor that powers the tool. Unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Keep in mind this high-quality carbon brush is sold individually. Note, the brush holder is sold separately. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

Carbon Brush

$43.74

Fix Number: FIX10162892
Manufacturer Part Number: 30711097001

This is a genuine manufacturer-sourced replacement carbon brush which is used on Fein rotary drills. Carbon brushes are one of the most commonly replaced power tool components, they are used to conduct the electric current by maintaining physical contact with an armature. Over time brushes will begin to wear down eventually requiring replacement to maintain peak performance. It is a high-quality item which is made of durable carbon material with an attached lead wire with a spring and it is sold individually, please note it is advised to replace both carbon brushes at the same time.

Groove Ball Bearing

$26.24

Fix Number: FIX9952793
Manufacturer Part Number: 41701001032

This is an authentic, Fein replacement part sourced directly from the manufacturer. The groove ball bearing is constructed of high-quality metal, and is designed for use in oscillating tools. This item secures the magnetic holder onto the armature shaft of the device. A hex key is necessary in the removal and replacement of the bearing. This part is sold individually.

Cable Assembly

$56.23

★★★★★

1 Review

Fix Number: FIX10162882
Manufacturer Part Number: 30707345019

This is a genuine replacement part manufactured for Fein products. This durable two wire cable is 18 gauge, and used to power a variety of products. The cable assembly is sold individually, please see model diagram for additional parts such as cord protectors.

Fein Electric Drill Parts

Popular Fein Electric Drill Parts

Fein Electric Drill Appliance Types

Related Fein Electric Drill Parts

Popular Fein Electric Drill Models

Fein Electric Drill Parts

Start With Your Model Number

Popular Fein Electric Drill Parts

Fein Electric Drill Appliance Types

Related Fein Electric Drill Parts

Popular Fein Electric Drill Models