OEM Delta Drill Press Parts & Accessories

Table Saw Switch

$41.51

Fix Number: FIX10325609
Manufacturer Part Number: 489105-00

This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.

Installation Instructions

keith from EMPORIA, KS

Power switch would not turn saw off

unplugged power cord.
removed the nut holding the power switch assembly on the saw.
removed 3 screws from the back cover.
removed the 2 white wires and 2 black wires from the switch terminal post. pay attention to wire color on each post.
removed old switch from the bracket by squeezing the sides of the old switch to remove the switch from the bracket.
inserted the new switch in place in the opening.
re attached the wires to the spade terminal on the switch using the 4 terminals. black on the 2 posts top and bottom on one side and the other side white on the top and bottom.
re attach the switch assembly to the table saw
test operation Read more...

Spring W/hsg.

$62.28

★★★★★

1 Review

Fix Number: FIX10315885
Manufacturer Part Number: 1310082

Genuine Delta replacement part, this part with 2 part. The Delta 1310082 Spring With Housing is the part of the drill presses listed below that returns the drill chuck back to its original position after using the drill press. This part contains the spring and the spring housing.

Switch

$126.92

Fix Number: FIX10328665
Manufacturer Part Number: 905224

This is a switch for a variety of power tools. It is a commonly replaced part as it handles the on and off operations in your tool. This part will get damage over time because it uses mechanical internals. The most common reason for needing to replace the switch is if your tool has power but is not turning on.

Spring With Housing

$31.14

Fix Number: FIX10315886
Manufacturer Part Number: 1310084

This is a genuine OEM sourced replacement part designed for use with a drill press. It allows height adjustment handle to retract. It is made out of metal and it is sold individually. This assembly includes a metal spring, housing and a retainer. You would need a wrench to complete this repair.

Geared Tooth

$24.91

Fix Number: FIX10323447
Manufacturer Part Number: 424020510008

This is a genuine OEM sourced replacement part designed for use with Delta radial arm saws. It is an important part of the adjusting mechanism. This gear is made out of plastic and it is sold individually. To complete this repair you would need a screwdriver and a wrench set. • First you want to positions saw on its side • Punch out roll pin holding the gear on • Remove old gear • Install new gear on shaft • Secure gear with roll pin

Push-button Switch

$41.51

Fix Number: FIX10328372
Manufacturer Part Number: 904121

This is a Genuine OEM Sourced replacement part used on Delta Power Equipment. This switch has a Plastic Body. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Please note the Switch Box and the Cover are Sold Separately. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing

Chuck Key

$29.06

★★★★★

2 Reviews

Fix Number: FIX10315975
Manufacturer Part Number: 1313105

This replacement part is supplied by the original equipment manufacturer. It is specially designed for use with Delta drill presses. The key allows a user to tighten and loosen the jaws of the chuck. Refer to the owners manual of your model for the correct application. Note, this high-quality chuck key is made of durable metal and is sold individually.

Installation Instructions

johnny from ROYSTON, GA

no problem

it was a chuck key for drill press Read more...

Key

$10.37

Fix Number: FIX10318424
Manufacturer Part Number: 1343758

This safety key fits multiple hardware tools and is inserted into the switch to make it possible for your machine to turn on and operate. Tip: you can remove the key to prevent unauthorized use of the machine. For installation instructions refer to the diagram provided by the manufacturer.