Black and Decker Drill Press Parts

★★★★★

★★★★★

10 Reviews

Fix Number

FIX10325609

Manufacturer Part Number

489105-00

This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.

Fix Number

FIX10315886

Manufacturer Part Number

1310084

This is a genuine OEM sourced replacement part designed for use with a drill press. It allows height adjustment handle to retract. It is made out of metal and it is sold individually. This assembly includes a metal spring, housing and a retainer. You would need a wrench to complete this repair.

Fix Number

FIX10172207

Manufacturer Part Number

400814-00

Genuine Dewalt/Black & Decker replacement part. includes 1 Carbon Brush with wire lead and brush spring attached. 2 Brushes are needed for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Fix Number

FIX10318424

Manufacturer Part Number

1343758

This safety key fits multiple hardware tools and is inserted into the switch to make it possible for your machine to turn on and operate. Tip: you can remove the key to prevent unauthorized use of the machine. For installation instructions refer to the diagram provided by the manufacturer.

Fix Number

FIX10165211

Manufacturer Part Number

038769-00

Genuine OEM replacement part, this item is sold individually. This spring is used in various locations of the tools listed below. Over time springs will loose their tension and will need to be replaced. The dimensions on this spring are 5/16 in length and 3/16 in diameter.

Fix Number

FIX17016192

Manufacturer Part Number

1344258

This is a genuine Delta crank handle which is found on many drill press models. It will directly replace a worn, broken or missing handle. Please note that this handle does include the set screw for securing it in place. The handle will fit the Delta drill press models listed in the section below, but it is not guaranteed to fit any other tools.

Fix Number

FIX10169670

Manufacturer Part Number

330015-03

This hex nut with internal threads, screws to the shank of a bolt or a hex cap screw in a variety of lawn and gardening tools. It can have multiple applications depending on the tool you are using. To replace, you will need a wrench to loosen and tighten the nut. For detailed installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug tool from power source before beginning this repair project.

Fix Number

FIX10184176

Manufacturer Part Number

683784

The terminal is made out of metal. This item is available as an individual replacement part. It is a genuine DeWALT, Black & Decker, and Porter Cable part sourced directly from the manufacturer for use in saws, drills, engines, grinders, nibblers, routers, sanders, and shears. A set of pliers may be required to replace this item. This part may become broken and will need to be replaced.

Fix Number

FIX10187403

Manufacturer Part Number

N031655

This replacement brush and spring assembly is specially made for use on Black and Decker and Dewalt power tools. One carbon brush with a lead wire and a spring attached is included per order. It is highly advised to replace both brushes at the same time. Please note, brush holders and caps are all sold separately. A screwdriver will be needed to complete this repair.

Fix Number

FIX10173377

Manufacturer Part Number

444518-98

This 10 ft. power cord is a genuine manufacturer sourced replacement part that is specially produced for Black and Decker and Dewalt power tools. It is used to supply electricity from a standard U.S. outlet to the tool. One durable rubber insulated cord is included per order, please note the cord sleeve protector is sold separately.