OEM Powermate Compressor Parts & Accessories

Gasket

$45.44

Fix Number: FIX9868774
Manufacturer Part Number: 046-0151

This is a genuine manufacturer-sourced replacement part designed for use with Powermate air compressors. It provides a tight seal between connected parts, unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality gasket is made of durable composite material and is sold individually.

CAP, OIL FILL W/O-RING

$15.22

★★★★★

2 Reviews

Fix Number: FIX18715722
Manufacturer Part Number: E100087

This is an oil fill cap with a gasket seal attached. It is sold as an individual part and is used in air compressors. It connects to the crank case cover to help contain the oil inside the unit. No tools are required, just twist to secure into place. If your air compressor is leaking oil, or this part is damaged, it will need to be replaced with this genuine OEM replacement part.

Installation Instructions

Wynn from COHASSET, MA

oil fill/ vent broken

unscrewed broken part screwed in new part Read more...

Petcock

$8.43

Fix Number: FIX9870114
Manufacturer Part Number: 072-0006

This is an authentic OEM replacement part that has been sourced directly from Powermate. The petcock on your air compressor is also known as a drain valve. While your compressor is pressurizing air a layer of moisture builds up inside the tank, the valve allows you to drain the condensation and compressed air from the tank. This helps limit the corrosion of the tank, and extends the life of you air compressor. Your drain valve might need to be replaced if it is corroded, rusted, leaky, or stripped down. This drain valve comes with sealant on the threads, this helps ensure the connection is airtight when the part is installed. Before starting this replacement be sure to disconnect power to your air compressor and drain all of the air from your tank.

Piston/cylinder Kit

$215.50

Fix Number: FIX9868936
Manufacturer Part Number: 048-0105

This is an authentic OEM replacement part that has been sourced directly from Powermate. This kit contains all of the replacement parts you will need to successfully rebuild the piston/cylinder assembly in your air compressor. As the piston ring wears down the piston can damage the inside of the cylinder, damage of this nature can limit your compressors ability to build pressure. This rebuild kit includes the rod, the piston, the piston ring, the cylinder, o-rings, the gasket, the ring screw and nut. This is sold as a complete set only. Before replacing any parts on your air compressor make sure you disconnect the power and drain the air tank.

Valve Plate Assy

$84.63

Fix Number: FIX9868614
Manufacturer Part Number: 043-0180

This is a genuine OEM sourced replacement valve kit designed for use with Powermate equipment. The purpose of the valve plate is to allow air into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and the air is sent into the tank. Over time valves and gaskets will become worn and would need to be replaced to keep your equipment running well. To complete this repair you would need a wrench set and a screwdriver to take off the housing and the cylinder head. Keep in mind this high-quality valve plate assembly is made of durable metal and is sold as an individual component.

Plate, Assy

$97.97

Fix Number: FIX9868607
Manufacturer Part Number: 043-0142

It is a genuine OEM supplied item that is made for use with Powermate air compressors. This is an identical replacement for damaged or a missing component that was installed on a new unit. The plate assembly is an important part which provides a tight seal between the head and the cylinder body. Check the diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality plate assembly is made of durable materials and is sold as an individual item. A wrench set will be needed to replace this component.

Oil Sight Gauge

$26.85

Fix Number: FIX12091405
Manufacturer Part Number: E109153

This authentic component is supplied by the original equipment manufacturer for use with Powermate and Husky air compressors. The oil sight gauge registers oil level. If the part is faulty or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. To ensure the proper repair procedure, refer to the owner's manual and the appropriate diagrams for your model. Keep in mind this high-quality oil sight gauge is sold as an individual item.

Check Valve

$32.62

Fix Number: FIX18715739
Manufacturer Part Number: E101208

This is a genuine replacement part sourced from the original manufacturer for use with air compressors made by Craftsman. This part allows air flow into the tank and keeps air from flowing back into the pump. This part is made of metal and sold individually.

Valve, Reed

$18.70

Fix Number: FIX10044655
Manufacturer Part Number: E100229

This replacement valve reed is a n authentic OEM item that is specially designed for Craftsman air compressors. Reed valves are commonly used in high-performance versions of the two-stroke engine, where they control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase beneath the piston. Please note this metal reed valve is sold individually.

Fixes these symptoms

No compressed air
See more...

Installation Instructions

RICHARD from MILLSTONE TWP, NJ

Compressor leaking air and hot building pressure beyond 40 PSI

Unplug the power to the compressor and drain air from tank.

1. Remove two bolts under compressor motor that hold motor to frame. This allows access to the three interior screws that are part of the motor cover.
2. Remove the 6 screws that hold the motor cover. There are 3 on the back and 3 on the front.
3. Loosen the 4 Allen head bolts from the top of the compressor. When removing, make sure that the washers are not lost.
4. Make note of the sequence of gaskets.
5. Clean off old gasket material from head. This is PIA. Use a razor. Make sure you get all of the old gasket material off, else the repair will fail.
6. Inspect reed valves, replace is necessary.
7. Position NEW gasket material and reassemble.
8. Hand tighten Allen Head bolts.
9. Tighten head bolts with torque wrench diagonally to 12 Ft Lbs.
10. Replace compressor cover. It will NOT be necessary to replace all 6 screws, if you anticipate having to do this fix again.
11. Replace the two frame bolts.
12. Done Read more...

Valve, Bleeder

$33.53

Fix Number: FIX9890191
Manufacturer Part Number: 136-0090

This is a genuine replacement part sourced from the original manufacturer for use with electric two stage air compressors made by Powermate. When the air compressor reaches the maximum air pressure, this valve bleeder releases the air. It is recommended to review your models diagram to verify the parts compatibility. This part is sold individually and made of durable material.

Powermate Compressor Parts

Popular Powermate Compressor Parts

Installation Instructions

Installation Instructions

Powermate Compressor Appliance Types

Related Powermate Compressor Parts

Popular Powermate Compressor Models

Powermate Compressor Parts

Start With Your Model Number

Popular Powermate Compressor Parts

Installation Instructions

Installation Instructions

Powermate Compressor Appliance Types

Related Powermate Compressor Parts

Popular Powermate Compressor Models