Delta Compressor Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Delta Appliance Parts
Shop By Appliance Type

Popular Delta Compressor Parts

ASSY FASTENER – Part Number: ACG-408
ASSY FASTENER
$6.51
In Stock
Fix Number
FIX12512819
Manufacturer Part Number
ACG-408
This assembly fastener is supplied directly from the original equipment manufacturer. The screws are constructed of metal, and are compatible with many compressor machines. This part is often used to secure the compressor shroud. It is recommended to refer to specific manual and diagrams for repair instructions. This part is sold individually. Purchasing spare screws is also encouraged, as they can wear out over time and regular use. A hex key and a screwdriver are helpful in the removal and replacement.
Watch the install video
Connecting Rod Assembly – Part Number: N036518
Connecting Rod Assembly
$48.35
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10049057
Manufacturer Part Number
N036518
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit Includes: Piston Rod, Compression Ring , Cylinder Sleeve & Bearing. Please note that this kit does not include the valve plate, head gaskets, or any other compressor parts. Replacing this kit you would need a Screwdriver, Hex Key/Allen Wrench and Pliers.
PRESSURE SWITCH – Part Number: 5140110-49
PRESSURE SWITCH
$99.62
Special Order
Fix Number
FIX18982284
Manufacturer Part Number
5140110-49
This is a Genuine Manufacturer Approved replacement part designed to work with a variety of Air Compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a Pressure Switch could be leaking air. If it is leaking air the Pressure Switch should be replaced for a compressor to operate properly and safely.
Watch the install video
CLAMP HOSE .250 ID – Part Number: CAC-1206-1
CLAMP HOSE .250 ID
$6.51
In Stock
Fix Number
FIX12513333
Manufacturer Part Number
CAC-1206-1
This high-quality OEM metal hose clamp is a part found in air compressors, and is sold individually. This part can be used on multiple parts on the air compressor, so the exact location, and repair may differ. In general, it is used to clamp hoses. For this repair, begin by draining the air out of the tank to remove the pressure placed on the components.
Fixes these symptoms

Installation Instructions

Rick from FRAMINGHAM, MA
Air leakage from hose
I followed the help from a YouTube video. It was for a slightly different model of P-C air compressor, but didn't really matter. This procedure is quite straightforward. Several screws are removed to access the pump-end of the rubber hose. Use The new hose was somewhat longer than the old one, but I didn't try to cut it down. Be sure to crimp the replacement clamps good and snug! Secure all screws and test the compressor. All good! Read more...
Watch the install video
BELT TIMING – Part Number: AC-0815
BELT TIMING
$29.98
In Stock
Fix Number
FIX12497302
Manufacturer Part Number
AC-0815
This is an OEM part sourced directly from the manufacturer. The belt is commonly found in Craftsman air compressors. This part is made of flexible rubber, and is used to transfer power between the piston and the pump assembly. Over time, it may become cracked and brittle, requiring replacement. You may need an Allen wrench or hex key when replacing this part. This item is sold individually.

Installation Instructions

Robert from PORT HURON, MI
Replace broken belt
Removed cover. Replace belt , reinstall cover Read more...
VALVE CHECK 1/2NPT X – Part Number: A19712
VALVE CHECK 1/2NPT X
$20.25
In Stock
Fix Number
FIX18990718
Manufacturer Part Number
A19712
This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.

Installation Instructions

Mark from MECHANICSVLLE, VA
Compressor motor would run and not cut off or reach over 30psi.
Ordered part # FIX10115358 : Valve Check 1/2NPT X per Fix.com recommendation. The part I received from Fix was wrong but the correct part was received quickly.
Very easy removal and installation with wrench set.
I still have the same problem and I am troubleshooting. Read more...
Watch the install video
TUBE SEAL – Part Number: N044359
TUBE SEAL
$6.51
Special Order
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12522478
Manufacturer Part Number
N044359
This is a tube seal used with various power tools. The seal prevents air from leaking out of your equipment. It is placed on the outlet tube, and connected to the head of the compressor. Note that this part is sold individually. If you are having trouble with your air pressure, you may need to replace this part.
Fixes these symptoms

Installation Instructions

Ray from Derby, CT
low air pressure
removed head and air tube, reassembled same Read more...
Watch the install video
VALVE PLATE ASSY – Part Number: N017592SV
VALVE PLATE ASSY
$19.98
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12517182
Manufacturer Part Number
N017592SV
This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor tank. The most common sign of a damaged valve is if your pressure is not building up in the tank. The reeds on the valve plate are usually the first thing to wear out. If you notice visible damage on the reeds you will need to replace this part. This valve includes the plate, and the lower gasket. The head gasket is sold individually.
Fixes these symptoms

Installation Instructions

Ray from Derby, CT
low air pressure
removed head and air tube, reassembled same Read more...
GRAPHITE GASKET KIT – Part Number: D30139
GRAPHITE GASKET KIT
$28.12
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX18991725
Manufacturer Part Number
D30139
Genuine OEM replacement parts kit. This Gasket Kit is used to prevent air leaks in the compressors listed below. Over time the gaskets will become compressed or cracked and you will hear an air leak coming from the compressor. They will need to be replaced. This would be a good time to inspect all the other wear parts of the compressor.
Fixes these symptoms
Watch the install video
GASKET HEAD UMC GRAP – Part Number: Z-D24819
GASKET HEAD UMC GRAP
$24.90
In Stock
Fix Number
FIX12543085
Manufacturer Part Number
Z-D24819
This is a manufacturer-approved head gasket for an air compressor, sold individually. It is designed to seal the valve plate to the cylinder head. If this gasket is damaged or worn, this can create an air leak from the head, which will make it so the compressor is no longer pressurizing the tank. For this repair you will need the following tools: Philips screwdriver, torx drivers, flat-blade screwdriver, long-nosed pliers, impact driver or socket wrench, and a torque wrench.
Fixes these symptoms

Delta Compressor Appliance Types

Popular Delta Compressor Models

View More
+