Official Husqvarna Trimmer Control Cables

Drive Control Cable

$41.12

Fix Number: FIX9286772
Manufacturer Part Number: 532181699

This drive control cable is a high quality replacement part that is sourced from original equipment manufacturer for use on high wheeled trimmers. The control cable stops the blade when the control handle is released, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note one durable rubber insulated cable is included per order.

Trimmer Cable/Wire Harness Assembly

$32.95

Fix Number: FIX9035059
Manufacturer Part Number: 576139401

This item has been sourced from the original manufacturer to be used with trimmers and edgers from Husqvarna and Jonsered. The wire harness is a complete part assembly that includes the throttle cable and control wires. This item is used to run the motor, and to adjust the engines out by linking the control handles. This item is priced as a single item.

Drive Cable

$34.27

Fix Number: FIX9982805
Manufacturer Part Number: 584954101

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Craftsman trimmers. The drive cable assembly connects the handle drive control to the transmission which enables you to control the speed and the direction of the trimmer head. This part is sold individually and is made of hard plastic and metal wire. You will need a screwdriver and needle nose pliers to aid you in this repair. Be sure to let the engine cool before you begin installing.

Throttle Cable

$32.95

Fix Number: FIX9289113
Manufacturer Part Number: 544171701

This is an original Husqvarna replacement throttle cable designed for use with handheld trimmers, edgers and pole saws. Throttle cable connects to the carburetor and it stops the engine when you shift the lever to the full choke position. Please note the housing, trigger and screws are sold separately. Includes one metal wire throttle cable per order. To complete this repair you will need a screwdriver. • Remove the housing screws • Separate the throttle housing • Remove the trigger • Remove the throttle cable • Install the throttle cable • Reassemble and test the unit

Throttle Cable

$16.14

Fix Number: FIX12633762
Manufacturer Part Number: 530057991

This is an authentic replacement part manufactured for use with trimmers. The throttle cable connects the throttle trigger and carburetor. The connections on either end of the cable can break, or the cable can kink causing it to break. Replacing a broken throttle cable is a good way to extend the life of the trimmer. The throttle cable is sold individually. Depending on the model trimmer the tools needed maybe a screwdriver, torx screwdriver, or hex key.

Trimmer Cable/Wire Harness

$32.95

Fix Number: FIX9029410
Manufacturer Part Number: 545125301

It is a genuine item that is supplied by the original equipment manufacturer for use Husqvarna handheld lawn and garden equipment. This is an identical replacement for a missing or faulty assembly cable/wire harness that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable materials and is sold individually.

Throttle Control

$35.15

Fix Number: FIX9282248
Manufacturer Part Number: 502189801

This is an OEM replacement part for Husqvarna and Jonsered line trimmers and brush cutters. The throttle control is designed to attach to the throttle and is used to adjust the air intake of the engine. The part is made of durable material. This item is sold individually.

Throttle Wire

$25.34

Fix Number: FIX16352717
Manufacturer Part Number: 530058756

This is an original Weed Eater, Jonsered part for use with Hedge Trimmers. The throttle cable controls the engine speed. The most common reasons to replace the throttle cable are when the throttle body arm doesn't move when the throttle lever is pulled, or the wire is not moving freely in the cable. This part is sold individually. The tools that you will need to replace the throttle cable is a 10mm wrench, 14mm wrench, and a flat head screwdriver.

Tie, Cable

$12.05

Fix Number: FIX9010780
Manufacturer Part Number: 532007192

This is an authentic item that is supplied by the original equipment manufacturer. It is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of this clip is to secure the cable to the frame. Make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct application of this component. This high-quality cable clip is made of durable plastic material and is sold individually. To secure the clip, wrap it around the cord and the frame, and then pull one side of the clip through the loop.

Throttle cable

$28.55

Fix Number: FIX12606810
Manufacturer Part Number: 578867801

This throttle cable is designed to provide smooth and precise control of engine speed by connecting the trigger assembly to the carburetor. Built for durability and consistent performance, it allows for responsive throttle adjustments during operation. Ideal for replacing a worn, stretched, or damaged cable, it helps restore reliable control and maintain efficient equipment performance.

Husqvarna Trimmer Control Cables

Popular Husqvarna Trimmer Control Cables

Related Husqvarna Trimmer Parts

Husqvarna Trimmer Control Cables

Start With Your Model Number

Popular Husqvarna Trimmer Control Cables

Related Husqvarna Trimmer Parts