Husqvarna Trimmer Wheels and Rollers

Husqvarna Appliance Parts

Popular Husqvarna Trimmer Wheels and Rollers

Fix Number
FIX9013718
Manufacturer Part Number
532182217
This is a manufacturer approved mow ball assembly used on some Wheeled Trimmers. Mow ball assembly prevents the trimmer from scalping the grass. This Assembly includes the Plastic Housing, Ball Bearing and a Retaining Ring. Please note Bolt used to attach this assembly is Sold Separately.
Flywheel
$39.55
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX16365732
Manufacturer Part Number
545221701
This is an original replacement part manufactured for use with handheld leaf blowers. The flywheel has magnets on its side that create an electric charge as the magnets pass the ignition module. The electric charge is sent to the spark plug to fire the air-fuel mix in the cylinder. The flywheel fits on the crankshaft by a key that aligns with a keyway on the crankshaft, this allows for proper firing timing. If the key on the flywheel is broken it can cause misfires or will not start at all. This flywheel is sold as an individual replacement part.
Wheel
$38.39
In Stock
Fix Number
FIX11824808
Manufacturer Part Number
585911001
This is a genuine manufacturer approved item. It is supplied directly from original equipment manufacturer for use with walk-behind lawn mowers. It allows unit to be mobile for easy movement/transportation. This wheel is made out of plastic and it is sold individually. Please note, the axle bolt and the washer that secures this wheel are sold separately. A wrench will be needed to replace this wheel.
Flexshaft
$7.65
In Stock
Fix Number
FIX9030716
Manufacturer Part Number
545132002
This is a genuine OEM sourced replacement flexshaft that is specially designed for Husqvarna and Poulan trimmers and edgers. It fits inside the drive shaft housing to drive the cutting head. It is made from durable metal and it is sold individually.
Shaft-flex 50
$11.27
Special Order
Fix Number
FIX16352921
Manufacturer Part Number
530095803
This flexible drive shaft fits inside the drive shaft housing assembly to drive the cutting head. It is a genuine manufacturer approved replacement item that is specially designed for Weed Eater string trimmers. Eventually, the rounded ends will fail to engage the trimmer head. It is also possible to kink or even break the drive shaft cable by stopping the trimmer head very rapidly. It is made from high quality metal and it is sold individually.
Drive Shaft
$28.55
In Stock
Fix Number
FIX12660815
Manufacturer Part Number
581815101
Power reaches a trimmer or brush-cutter head through the driveshaft inside the outer tube. Bent metal or worn splines may cause rattling, slipping, poor cutting, or no head movement. Check the clutch and gear head before ordering a replacement because they can create similar symptoms. Match the shaft to the full equipment model and parts diagram. Shut off the tool, disconnect the spark plug wire or remove the battery, wear gloves, and make sure both shaft ends engage fully before reassembly and testing.
Upper Shaft Kit
$49.45
In Stock
Fix Number
FIX16367531
Manufacturer Part Number
575260201
Smooth trimmer operation depends on a straight shaft and a working drive cable. Replace the upper shaft kit if the tube is bent, the cable is worn, or the head turns poorly. First check both shaft connections and remove any grass wrapped around the cutting head. Confirm fit with the full tool model number. Review the parts diagram because kit contents may differ. Let the tool cool, remove its battery or spark plug wire, and keep all clamps and fasteners secure.
Kit, Driveshaft Upper
$66.71
On Order
Fix Number
FIX9034490
Manufacturer Part Number
575261201
This genuine item is supplied by the original equipment manufacturer for use with Husqvarna trimmers. It is a high-quality replacement for a missing or a faulty upper shaft that was included with a new unit. The part houses the flexible shaft that rotates the cutting head, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality kit is made of durable metal and is sold individually, keep in mind it includes the housing and the flexible shaft.
Kit Driveshaft Lower Cd
$81.71
In Stock
Fix Number
FIX9037353
Manufacturer Part Number
545180847
This replacement shaft kit is a genuine part sourced from original manufacturer. This is the lower curved portion of the two-piece shaft. It is used in some Husqvarna lawn trimmers, including model 128CD. This is a three (3) part kit which includes one (1) each of: lower driveshaft, dust cap, and trimmer head. The dust cap and trimmer head can be purchased separately as well (see below). Associated Parts That Are Sold Separately: • Dust Cap, part # 545017403 • Trimmer Head: T25 HVA Universal Trimmer Head, part # 966674401 • Upper Driveshaft: Kit "Upper Shaft, Incl Flex" part # 5752625-01 (includes flexible driveshaft cable)
Kit, Lower Shaft
$32.95
On Order
Fix Number
FIX9289275
Manufacturer Part Number
545180848
This is an authentic replacement part manufactured for use with Husqvarna trimmers. The lower shaft kit is used to house the driveshaft and this kit includes the inner driveshaft housing and grease to reduce friction between the driveshaft and housing. This lower shaft kit is available as an individual replacement part.

Related Husqvarna Trimmer Parts